kernel 4.9.3 still not working latest log: [ 196.984424] sd 7:0:0:0: [sdc] 31293440 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 196.984564] sd 7:0:0:0: [sdc] Write Protect is off [ 196.984566] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 196.984689] sd 7:0:0:0: [sdc] No Caching mode page found [ 196.984690] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 196.984696] device: '8:32': device_add [ 196.984714] PM: Adding info for No Bus:8:32 [ 196.984727] device: 'sdc': device_add [ 196.984747] PM: Adding info for No Bus:sdc [ 197.085658] sdc: sdc1 [ 197.085664] device: 'sdc1': device_add [ 197.085680] PM: Adding info for No Bus:sdc1 [ 197.086929] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 230.955006] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 234.422942] DMAR: DRHD: handling fault status reg 2 [ 234.422946] DMAR: [DMA Read] Request device [02:00.0] fault addr fffbb000 [fault reason 06] PTE Read access is not set [ 234.422950] xhci_hcd 0000:02:00.0: WARNING: Host System Error [ 234.446078] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds. [ 270.447035] xhci_hcd 0000:02:00.0: xHCI host not responding to stop endpoint command. [ 270.447040] xhci_hcd 0000:02:00.0: Assuming host is dying, halting host. [ 270.470143] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds. [ 270.470153] xhci_hcd 0000:02:00.0: Non-responsive xHCI host is not halting. [ 270.470154] xhci_hcd 0000:02:00.0: Completing active URBs anyway. [ 270.470161] xhci_hcd 0000:02:00.0: HC died; cleaning up [ 270.470265] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK [ 270.470268] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 22 00 00 0e 00 [ 270.470269] blk_update_request: I/O error, dev sdc, sector 413986 [ 270.538994] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 270.538997] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 23 00 00 0d 00 [ 270.538998] blk_update_request: I/O error, dev sdc, sector 413987 [ 270.986995] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 270.986997] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 22 00 00 01 00 [ 270.986999] blk_update_request: I/O error, dev sdc, sector 413986 [ 270.987063] FAT-fs (sdc1): Directory bread(block 411938) failed [ 271.307002] sd 7:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 271.307004] sd 7:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 06 51 23 00 00 01 00 [ 271.307005] blk_update_request: I/O error, dev sdc, sector 413987 [ 271.307062] FAT-fs (sdc1): Directory bread(block 411939) failed [ 271.307079] FAT-fs (sdc1): Directory bread(block 411940) failed [ 271.307084] FAT-fs (sdc1): Directory bread(block 411941) failed [ 271.307088] FAT-fs (sdc1): Directory bread(block 411942) failed [ 271.307092] FAT-fs (sdc1): Directory bread(block 411943) failed [ 271.307096] FAT-fs (sdc1): Directory bread(block 411944) failed [ 271.307099] FAT-fs (sdc1): Directory bread(block 411945) failed [ 271.307103] FAT-fs (sdc1): Directory bread(block 411946) failed [ 271.307106] FAT-fs (sdc1): Directory bread(block 411947) failed [ 271.307174] FAT-fs (sdc1): FAT read failed (blocknr 2446) [ 271.307206] FAT-fs (sdc1): FAT read failed (blocknr 2821) [ 271.307229] FAT-fs (sdc1): FAT read failed (blocknr 3093) [ 271.307279] FAT-fs (sdc1): FAT read failed (blocknr 17088) [ 271.307298] FAT-fs (sdc1): FAT read failed (blocknr 17089) [ 271.308434] FAT-fs (sdc1): FAT read failed (blocknr 2241) [ 282.002018] xhci_hcd 0000:02:00.0: Stopped the command ring failed, maybe the host is dead [ 282.025084] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds. [ 282.025084] xhci_hcd 0000:02:00.0: Abort command ring failed [ 282.025104] xhci_hcd 0000:02:00.0: HC died; cleaning up [ 282.025108] usb 3-1: USB disconnect, device number 2 2017-01-10 13:06 GMT+03:00 c400 <c400c400@xxxxxxxxx>: > hi! > Using 4.9.2 kernel. Still no success with VL805 USB 3.0 > i can give a remote shell to test and reproduce the bug > > any help? > > 2016-09-23 0:47 GMT+03:00 c400 <c400c400@xxxxxxxxx>: >> btw >> i've tested a liitle better and the disk is visible, but write errors occurs >> after ejecting and inserting it is invisible again >> >> [129416.884960] sd 7:0:0:0: [sdc] 1250263728 512-byte logical blocks: >> (640 GB/596 GiB) >> [129416.885429] sd 7:0:0:0: [sdc] Write Protect is off >> [129416.885434] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 >> [129416.885798] sd 7:0:0:0: [sdc] No Caching mode page found >> [129416.885801] sd 7:0:0:0: [sdc] Assuming drive cache: write through >> [129416.885806] device: '8:32': device_add >> [129416.885820] PM: Adding info for No Bus:8:32 >> [129416.885831] device: 'sdc': device_add >> [129416.885847] PM: Adding info for No Bus:sdc >> [129416.897283] sdc: sdc1 >> [129416.897291] device: 'sdc1': device_add >> [129416.897309] PM: Adding info for No Bus:sdc1 >> [129416.898828] sd 7:0:0:0: [sdc] Attached SCSI disk >> [129479.043607] usb 3-1: reset SuperSpeed USB device number 3 using xhci_hcd >> [129483.506009] xhci_hcd 0000:02:00.0: WARNING: Host System Error >> [129483.529130] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds. >> [129483.529146] DMAR: DRHD: handling fault status reg 2 >> [129483.529149] DMAR: [DMA Read] Request device [02:00.0] fault addr >> ffdf1000 [fault reason 06] PTE Read access is not set >> [129518.953695] xhci_hcd 0000:02:00.0: xHCI host not responding to >> stop endpoint command. >> [129518.953702] xhci_hcd 0000:02:00.0: Assuming host is dying, halting host. >> [129518.976675] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds. >> [129518.976686] xhci_hcd 0000:02:00.0: Non-responsive xHCI host is not halting. >> [129518.976687] xhci_hcd 0000:02:00.0: Completing active URBs anyway. >> [129518.976699] xhci_hcd 0000:02:00.0: HC died; cleaning up >> [129519.841735] sd 7:0:0:0: [sdc] tag#0 FAILED Result: >> hostbyte=DID_ERROR driverbyte=DRIVER_OK >> [129519.841739] sd 7:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 5b 72 >> e0 00 08 00 00 >> [129519.841741] blk_update_request: I/O error, dev sdc, sector 5993184 >> [129519.841743] Buffer I/O error on dev sdc1, logical block 5991136, >> lost async page write >> [129519.841745] Buffer I/O error on dev sdc1, logical block 5991137, >> lost async page write >> [129519.841747] Buffer I/O error on dev sdc1, logical block 5991138, >> lost async page write >> [129519.841748] Buffer I/O error on dev sdc1, logical block 5991139, >> lost async page write >> [129519.841749] Buffer I/O error on dev sdc1, logical block 5991140, >> lost async page write >> [129519.841750] Buffer I/O error on dev sdc1, logical block 5991141, >> lost async page write >> [129519.841752] Buffer I/O error on dev sdc1, logical block 5991142, >> lost async page write >> [129519.841753] Buffer I/O error on dev sdc1, logical block 5991143, >> lost async page write >> [129519.841758] Buffer I/O error on dev sdc1, logical block 5991144, >> lost async page write >> [129519.841760] Buffer I/O error on dev sdc1, logical block 5991145, >> lost async page write >> [129520.841755] sd 7:0:0:0: [sdc] tag#0 FAILED Result: >> hostbyte=DID_ERROR driverbyte=DRIVER_OK >> [129520.841759] sd 7:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 5b 7a >> e0 00 08 00 00 >> [129520.841760] blk_update_request: I/O error, dev sdc, sector 5995232 >> [129530.516824] xhci_hcd 0000:02:00.0: Stopped the command ring >> failed, maybe the host is dead >> [129530.540017] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds. >> [129530.540021] xhci_hcd 0000:02:00.0: Abort command ring failed >> [129530.540023] xhci_hcd 0000:02:00.0: HC died; cleaning up >> [129530.540064] usb 2-1: USB disconnect, device number 2 >> [129530.540067] device: 'ep_81': device_unregister >> [129530.540083] PM: Removing info for No Bus:ep_81 >> [129530.540099] bus: 'usb': remove device 2-1:1.0 >> [129530.540108] device: '2-1-port4': device_unregister >> [129530.540116] PM: Removing info for No Bus:2-1-port4 >> >> 2016-09-21 18:08 GMT+03:00 c400 <c400c400@xxxxxxxxx>: >>> 02:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host >>> Controller (rev 01) (prog-if 30 [XHCI]) >>> Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller >>> Flags: bus master, fast devsel, latency 0, IRQ 41 >>> Memory at fbb00000 (64-bit, non-prefetchable) [size=4K] >>> Capabilities: [80] Power Management version 3 >>> Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ >>> Capabilities: [c4] Express Endpoint, MSI 00 >>> Kernel driver in use: xhci_hcd >>> Kernel modules: xhci_pci -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
