Re: VL805 USB 3.0 does not see connected devices (only on x86_64) (x86 is ok)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[182047.000570] xhci_hcd 0000:02:00.0: remove, state 4
[182047.000577] usb usb4: USB disconnect, device number 1
[182047.023980] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds.
[182047.023982] xhci_hcd 0000:02:00.0: Host controller not halted,
aborting reset.
[182047.023996] xhci_hcd 0000:02:00.0: USB bus 4 deregistered
[182047.024103] xhci_hcd 0000:02:00.0: remove, state 1
[182047.024108] usb usb3: USB disconnect, device number 1
[182047.024320] xhci_hcd 0000:02:00.0: USB bus 3 deregistered
[182058.617466] xhci_hcd 0000:02:00.0: xHCI Host Controller
[182058.617556] xhci_hcd 0000:02:00.0: new USB bus registered,
assigned bus number 3
[182058.640820] xhci_hcd 0000:02:00.0: Host not halted after 16000 microseconds.
[182058.640822] xhci_hcd 0000:02:00.0: can't setup: -110
[182058.640824] xhci_hcd 0000:02:00.0: USB bus 3 deregistered
[182058.640944] xhci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -110
[182058.640947] xhci_hcd: probe of 0000:02:00.0 failed with error -110

can not see my flash inserted into the USB

echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control
Do not have such folder
(i`ve recompiled my kernel (make defconfig) with some small changes.
may be i need to enable something in kernelt?
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux