On Mon, 2016-08-22 at 20:07 +0300, Aleksandr Makarov wrote: > 22.08.2016 18:03, Dan Williams пишет: > > > > On Sat, 2016-08-20 at 14:50 +0300, Aleksandr Makarov wrote: > > > > > > USB: serial: option: add WeTelecom WM-D200 > > > > > > Add support for WeTelecom WM-D200. > > > > > > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 > > > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > > P: Vendor=22de ProdID=6801 Rev=00.00 > > > S: Manufacturer=WeTelecom Incorporated > > > S: Product=WeTelecom Mobile Products > > > C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA > > > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff > > > Driver=(none) > > > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff > > > Driver=(none) > > > I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff > > > Driver=(none) > > > I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > > > Driver=usb- > > > storage > > While you're at it, why not add PID 0x6802 and 0x6803? These are > > also > > listed here: > > > > http://www.mts.ua/upload/files/we/te/wetelecom_windows_drivers.zip > > > > with the same USB layout as the WM-D200. > > > > Dan > > > Does it mean that if 0x6803 (WeTelecom WM-D300) has the same > USB layout, it does not need testing? Yes, since the Windows drivers use the exact same layout for all three devices, we should do the same for Linux. > If it does not, why don't I copy the whole usb_modeswitch data > into the option driver? What specifically would you copy over? All I see there are two data files, one for 6801 and one for 6803, but they don't have any interesting data in them... Dan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
