From: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
USB: serial: option: add WeTelecom WM-D200
Add support for WeTelecom WM-D200.
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22de ProdID=6801 Rev=00.00
S: Manufacturer=WeTelecom Incorporated
S: Product=WeTelecom Mobile Products
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
---
--- drivers/usb/serial/option.c.orig 2016-08-19 15:15:17.173146316 +0300
+++ drivers/usb/serial/option.c 2016-08-19 15:16:04.241147738 +0300
@@ -519,6 +519,10 @@ static void option_instat_callback(struc
#define VIATELECOM_VENDOR_ID 0x15eb
#define VIATELECOM_PRODUCT_CDS7 0x0001
+/* WeTelecom products */
+#define WETELECOM_VENDOR_ID 0x22de
+#define WETELECOM_PRODUCT_WMD200 0x6801
+
struct option_blacklist_info {
/* bitmask of interface numbers blacklisted for send_setup */
const unsigned long sendsetup;
@@ -1969,6 +1973,7 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
+ { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
20.08.2016 13:05, Greg KH пишет:
> On Sat, Aug 20, 2016 at 11:19:37AM +0300, Aleksandr Makarov wrote:
>> From: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
>>
>> USB: serial: option: add WeTelecom WM-D200
>>
>> Add support for WeTelecom WM-D200.
>>
>> T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
>> P: Vendor=22de ProdID=6801 Rev=00.00
>> S: Manufacturer=WeTelecom Incorporated
>> S: Product=WeTelecom Mobile Products
>> C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
>> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>> I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
>>
>> Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
>> ---
>> --- linux/drivers/usb/serial/option.c.orig 2016-08-19 15:15:17.173146316
>> +0300
>> +++ linux/drivers/usb/serial/option.c 2016-08-19 15:16:04.241147738 +0300
>> @@ -519,6 +519,10 @@ static void option_instat_callback(struc
>> #define VIATELECOM_VENDOR_ID 0x15eb
>> #define VIATELECOM_PRODUCT_CDS7 0x0001
>>
>> +/* WeTelecom products */
>> +#define WETELECOM_VENDOR_ID 0x22de
>> +#define WETELECOM_PRODUCT_WMD200 0x6801
>> +
>> struct option_blacklist_info {
>> /* bitmask of interface numbers blacklisted for send_setup */
>> const unsigned long sendsetup;
>> @@ -1969,6 +1973,7 @@ static const struct usb_device_id option
>> { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },
>> /* OLICARD300 - MT6225 */
>> { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
>> { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
>> + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID,
>> WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
>> { } /* Terminating entry */
>> };
>> MODULE_DEVICE_TABLE(usb, option_ids);
>
> The patch is line-wrapped and can't be applied :(
>
> Can you fix that up and resend please?
>
> thanks,
>
> greg k-h
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
