USB: serial: option: add WeTelecom WM-D200
Add support for WeTelecom WM-D200.
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22de ProdID=6801 Rev=00.00
S: Manufacturer=WeTelecom Incorporated
S: Product=WeTelecom Mobile Products
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
---
--- a/linux/drivers/usb/serial/option.c 2016-08-20 14:44:19.668791103 +0300
+++ b/linux/drivers/usb/serial/option.c 2016-08-20 14:43:24.376790761 +0300
@@ -525,6 +525,10 @@ static void option_instat_callback(struc
#define VIATELECOM_VENDOR_ID 0x15eb
#define VIATELECOM_PRODUCT_CDS7 0x0001
+/* WeTelecom products */
+#define WETELECOM_VENDOR_ID 0x22de
+#define WETELECOM_PRODUCT_WMD200 0x6801
+
struct option_blacklist_info {
/* bitmask of interface numbers blacklisted for send_setup */
const unsigned long sendsetup;
@@ -1991,6 +1995,7 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
+ { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
20.08.2016 13:29, Aleksandr Makarov пишет:
> From: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
>
> USB: serial: option: add WeTelecom WM-D200
>
> Add support for WeTelecom WM-D200.
>
> T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=22de ProdID=6801 Rev=00.00
> S: Manufacturer=WeTelecom Incorporated
> S: Product=WeTelecom Mobile Products
> C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
>
> Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
> ---
> --- drivers/usb/serial/option.c.orig 2016-08-19 15:15:17.173146316 +0300
> +++ drivers/usb/serial/option.c 2016-08-19 15:16:04.241147738 +0300
> @@ -519,6 +519,10 @@ static void option_instat_callback(struc
> #define VIATELECOM_VENDOR_ID 0x15eb
> #define VIATELECOM_PRODUCT_CDS7 0x0001
>
> +/* WeTelecom products */
> +#define WETELECOM_VENDOR_ID 0x22de
> +#define WETELECOM_PRODUCT_WMD200 0x6801
> +
> struct option_blacklist_info {
> /* bitmask of interface numbers blacklisted for send_setup */
> const unsigned long sendsetup;
> @@ -1969,6 +1973,7 @@ static const struct usb_device_id option
> { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
> { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
> { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
> + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
> { } /* Terminating entry */
> };
> MODULE_DEVICE_TABLE(usb, option_ids);
>
> 20.08.2016 13:05, Greg KH пишет:
>> On Sat, Aug 20, 2016 at 11:19:37AM +0300, Aleksandr Makarov wrote:
>>> From: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
>>>
>>> USB: serial: option: add WeTelecom WM-D200
>>>
>>> Add support for WeTelecom WM-D200.
>>>
>>> T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
>>> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
>>> P: Vendor=22de ProdID=6801 Rev=00.00
>>> S: Manufacturer=WeTelecom Incorporated
>>> S: Product=WeTelecom Mobile Products
>>> C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
>>> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>>> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>>> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>>> I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
>>>
>>> Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@xxxxxxxxx>
>>> ---
>>> --- linux/drivers/usb/serial/option.c.orig 2016-08-19 15:15:17.173146316
>>> +0300
>>> +++ linux/drivers/usb/serial/option.c 2016-08-19 15:16:04.241147738 +0300
>>> @@ -519,6 +519,10 @@ static void option_instat_callback(struc
>>> #define VIATELECOM_VENDOR_ID 0x15eb
>>> #define VIATELECOM_PRODUCT_CDS7 0x0001
>>>
>>> +/* WeTelecom products */
>>> +#define WETELECOM_VENDOR_ID 0x22de
>>> +#define WETELECOM_PRODUCT_WMD200 0x6801
>>> +
>>> struct option_blacklist_info {
>>> /* bitmask of interface numbers blacklisted for send_setup */
>>> const unsigned long sendsetup;
>>> @@ -1969,6 +1973,7 @@ static const struct usb_device_id option
>>> { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },
>>> /* OLICARD300 - MT6225 */
>>> { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
>>> { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
>>> + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID,
>>> WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
>>> { } /* Terminating entry */
>>> };
>>> MODULE_DEVICE_TABLE(usb, option_ids);
>>
>> The patch is line-wrapped and can't be applied :(
>>
>> Can you fix that up and resend please?
>>
>> thanks,
>>
>> greg k-h
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
