On 06/16/2015 10:32 PM, Alan Stern wrote:
On Tue, 16 Jun 2015, Xuebing Wang wrote:
Hi Alan and community,
I am using mass storage kernel module of v4.0.1 for Freescale i.MX6SL
for a commercial product. As this is commercial product, thus USB host
compatibility is important.
1) It seems that Windows 7 host can *not* auto-mount if I pass
parameters as below:
modprobe g_mass_storage file=/dev/mmcblk0p4 iSerialNumber=abcdefgh nofua=1
Have you read this sentence from the USB Mass Storage Class Bulk-Only
Transport specification (section 4.1.1 Serial Number)?
The serial number shall contain at least 12 valid digits,
represented as a UNICODE string.
I don't know if Windows pays any attention to the length of the serial
number string, but it might. Also, take a look at section 4.1.2 Valid
Serial Number characters: It lists '0' - '9' and 'A' - 'F' but not 'a'
and certainly not 'g' or 'h'.
2) Windows 7 can auto-mount, if I pass pass parameters as below (with
removable=1)
modprobe g_mass_storage file=/dev/mmcblk0p4 iSerialNumber=abcdefgh
nofua=1 removable=1
But, there is a problem. If I eject the removable disk from Win7,
disconnect USB cable, and re-connect the USB cable, the removable disk
can NOT be auto-mounted on Win7.
Well, sure. The same thing happens with real USB storage devices.
For example, if you eject a CDROM from a USB CD player, the removable
CD can't be auto-mounted until you put a CDROM back into the player.
Unplugging and re-connecting the USB cable won't help.
It seems this makes sense, because Documentation/usb/mass-storage.txt
says below:
------
If this option (removable=1) is set for a logical unit, gadget will
accept an
“eject” SCSI request (Start/Stop Unit). When it is sent, the
backing file will be closed to simulate ejection and the logical
unit will not be mountable by the host until a new backing file is
specified by userspace on the device (see “sysfs entries”
section).
------
Would you please advise what is the best way to pass parameters to
g_mass_storage considering host compatibility?
This has nothing to do with parameters. If you want the storage to be
auto-mounted, don't eject it! Use the "Safely remove hardware" button
in Windows instead.
Also, what happens if you specify a _valid_ serial number and leave out
the "removable=1" parameter?
Alan,
Thank you very much for your help. Using a valid serial number like
below (and without removable=1) can NOT get Win7 to auto-mount it.
modprobe g_mass_storage file=/dev/mmcblk0p4 iSerialNumber=123456789012
nofua=1
Will mass storage gadget driver convert from ASCII serial number to UNICODE?
Any ideas? Thanks again.
--
Xuebing
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
