On 22.01.2015 21:39, Gunter Königsmann wrote: > Seems like this time we are nearly there: > - the scanner appears in lsusb > Bus 001 Device 005: ID 04f2:b33c Chicony Electronics Co., Ltd > Bus 001 Device 006: ID 0489:e056 Foxconn / Hon Hai > Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate > Matching Hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 002 Device 002: ID 04f3:0011 Elan Microelectronics Corp. > Bus 002 Device 003: ID 04b8:0133 Seiko Epson Corp. GT-1500 [GT-D1000] > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > - The scanner is detected by sane-find-scanner > - I can select it in xSane > - but then the xSane window no more reacts for about a minute and > then I get the message: "Failed to open device > 'epgowa:interpreter:002:003': Error during device I/O. > > Kind regards, > I think something went wrong when cloning the tree/branch, it shows old debug output like: "Endpoint 0x81 not halted, refusing to reset." Which shouldn't exists anymore. Are you sure you tried the ep_reset_halt_test branch? git log should look like this: https://git.kernel.org/cgit/linux/kernel/git/mnyman/xhci.git/log/?h=ep_reset_halt_test -Mathias -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
