Hello,
I'm happy to share my work on data type profiling. This is to associate
PMU samples to data types they refer using DWARF debug information. So
basically it depends on quality of PMU events and compiler for producing
DWARF info. But it doesn't require any changes in the target program.
As it's an early stage, I've targeted the kernel on x86 to reduce the
amount of work but IIUC there's no fundamental blocker to apply it to
other architectures and applications.
* How to use it
To get precise memory access samples, users can use `perf mem record`
command to utilize those events supported by their architecture. Intel
machines would work best as they have dedicated memory access events but
they would have a filter to ignore low latency loads like less than 30
cycles (use --ldlat option to change the default value).
# To get memory access samples in kernel for 1 second (on Intel)
$ sudo perf mem record -a -K --ldlat=4 -- sleep 1
# Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
$ sudo perf mem record -a --filter 'mem_op == load, ip > 0x8000000000000000' -- sleep 1
Note that it used 'sudo' command because it's collecting the event in
system wide mode. Actually it would depend on the sysctl setting of
kernel.perf_event_paranoid. AMD still needs root due to the BPF filter
though.
After getting a profile data, you would run perf report or perf
annotate as usual to see the result. Make sure that you have a kernel
debug package installed or vmlinux with DWARF info.
I've added new options and sort keys to enable the data type profiling.
Probably I need to add it to perf mem or perf c2c command for better
user experience. I'm open to discussion how we can make it simpler and
intuitive for regular users. But let's talk about the lower level
interface for now.
In perf report, it's just a matter of selecting new sort keys: 'type'
and 'typeoff'. The 'type' shows name of the data type as a whole while
'typeoff' shows name of the field in the data type. I found it useful
to use it with --hierarchy option to group relevant entries in the same
level.
$ sudo perf report -s type,typeoff --hierarchy --stdio
...
#
# Overhead Data Type / Data Type Offset
# ........... ............................
#
23.95% (stack operation)
23.95% (stack operation) +0 (no field)
23.43% (unknown)
23.43% (unknown) +0 (no field)
10.30% struct pcpu_hot
4.80% struct pcpu_hot +0 (current_task)
3.53% struct pcpu_hot +8 (preempt_count)
1.88% struct pcpu_hot +12 (cpu_number)
0.07% struct pcpu_hot +24 (top_of_stack)
0.01% struct pcpu_hot +40 (softirq_pending)
4.25% struct task_struct
1.48% struct task_struct +2036 (rcu_read_lock_nesting)
0.53% struct task_struct +2040 (rcu_read_unlock_special.b.blocked)
0.49% struct task_struct +2936 (cred)
0.35% struct task_struct +3144 (audit_context)
0.19% struct task_struct +46 (flags)
0.17% struct task_struct +972 (policy)
0.15% struct task_struct +32 (stack)
0.15% struct task_struct +8 (thread_info.syscall_work)
0.10% struct task_struct +976 (nr_cpus_allowed)
0.09% struct task_struct +2272 (mm)
...
The (stack operation) and (unknown) have no type and field info. FYI,
the stack operations are samples in PUSH, POP or RET instructions which
save or restore registers from/to the stack. They are usually parts of
function prologue and epilogue and have no type info. The next is the
struct pcpu_hot and you can see the first field (current_task) at offset
0 was accessed mostly. It's listed in order of access frequency (not in
offset) as you can see it in the task_struct.
In perf annotate, new --data-type option was added to enable data
field level annotation. Now it only shows number of samples for each
field but we can improve it.
$ sudo perf annotate --data-type
Annotate type: 'struct pcpu_hot' in [kernel.kallsyms] (223 samples):
============================================================================
samples offset size field
223 0 64 struct pcpu_hot {
223 0 64 union {
223 0 48 struct {
78 0 8 struct task_struct* current_task;
98 8 4 int preempt_count;
45 12 4 int cpu_number;
0 16 8 u64 call_depth;
1 24 8 long unsigned int top_of_stack;
0 32 8 void* hardirq_stack_ptr;
1 40 2 u16 softirq_pending;
0 42 1 bool hardirq_stack_inuse;
};
223 0 64 u8* pad;
};
};
...
This shows each struct one by one and field-level access info in C-like
style. The number of samples for the outer struct is a sum of number of
samples in every field in the struct. In unions, each field is placed
in the same offset so they will have the same number of samples.
No TUI support yet.
* How it works
The basic idea is to use DWARF location expression in debug entries for
variables. Say we got a sample in the instruction below:
0x123456: mov 0x18(%rdi), %rcx
Then we know the instruction at 0x123456 is accessing to a memory region
where %rdi register has a base address and offset 0x18 from the base.
DWARF would have a debug info entry for a function or a block which
covers that address. For example, we might have something like this:
<1><100>: Abbrev Number: 10 (DW_TAG_subroutine_type)
<101> DW_AT_name : (indirect string, offset: 0x184e6): foo
<105> DW_AT_type : <0x29ad7>
<106> DW_AT_low_pc : 0x123400
<10e> DW_AT_high_pc : 0x1234ff
<2><116>: Abbrev Number: 8 (DW_TAG_formal_parameter)
<117> DW_AT_name : (indirect string, offset: 0x18527): bar
<11b> DW_AT_type : <0x29b3a>
<11c> DW_AT_location : 1 byte block: 55 (DW_OP_reg2 (rdi))
So the function 'foo' covers the instruction from 0x123400 to 0x1234ff
and we know the sample instruction belongs to the function. And it has
a parameter called 'bar' and it's located at the %rdi register. Then we
know the instruction is using the variable bar and its type would be a
pointer (to a struct). We can follow the type info of bar and verify
its access by checking the size of the (struct) type and offset in the
instruction (0x18).
Well.. this is a simple example that the 'bar' has a single location.
Other variables might be located in various places over time but it
should be covered by the location list of the debug entry. Therefore,
as long as DWARF produces a correct location expression for a variable,
it should be able to find the variable using the location info.
Global variables and local variables are different as they can be
accessed directly without a pointer. They are located in an absolute
address or relative position from the current stack frame. So it needs
to handle such location expressions as well.
However, some memory accesses don't have a variable in some cases. For
example, you have a pointer variable for a struct which contains another
pointers. And then you can directly dereference it without using a
variable. Consider the following source code.
int foo(struct baz *bar) {
...
if (bar->p->q == 0)
return 1;
...
}
This can generate instructions like below.
...
0x123456: mov 0x18(%rdi), %rcx
0x12345a: mov 0x10(%rcx), %rax <=== sample
0x12345e: test %rax, %rax
0x123461: je <...>
...
And imagine we have a sample at 0x12345a. Then it cannot find a
variable for %rcx since DWARF didn't generate one (it only knows about
'bar'). Without compiler support, all it can do is to track the code
execution in each instruction and propagate the type info in each
register and stack location by following the memory access.
Actually I found a discussion in the DWARF mailing list to support
"inverted location lists" and it seems a perfect fit for this project.
It'd be great if new DWARF would provide a way to lookup variable and
type info using a concrete location info (like a register number).
https://lists.dwarfstd.org/pipermail/dwarf-discuss/2023-June/002278.html
* Patch structure
The patch 1-5 are cleanups and a fix that can be applied separately.
The patch 6-21 are the main changes in perf report and perf annotate to
support simple cases with a pointer variable. The patch 22-33 are to
improve it by handling global and local variables (without a pointer)
and some edge cases. The patch 34-43 implemented instruction tracking
to infer data type when there's no variable for that. The patch 44-47
handles kernel-specific per-cpu variables (only for current CPU). The
patch 48 is to help debugging and is not intended for merge.
* Limitations and future work
As I said earlier, this work is in a very early shape and has many
limitations or rooms for improvement. Basically it uses objdump tool to
extract location information from the sample instruction. And the
parsing code and instruction tracking work on x86 only.
Actually there's a performance issue about getting disassembly from the
objdump for kernel. On my system, GNU objdump was really slower than the
one from LLVM for some reason so I had to pass the following option for
each perf report and perf annotate.
$ sudo perf report --objdump=llvm-objdump ...
# To save it in the config file and drop the command line option
$ sudo perf config annotate.objdump=llvm-objdump
Even with this change, still the most processing time was spent on the
objdump to get the disassembly. It'd be nice if we can get the result
without using objdump at all.
Also I only tested it with C programs (mostly vmlinux) and I believe
there are many issues on handling C++ applications. Probably other
languages (like Rust?) could be supported too. But even for C programs,
it could improve things like better supporting union and array types and
dealing with type casts and so on.
I think compiler could generate more DWARF information to help this kind
of analysis. Like I mentioned, it doesn't have a variable for
intermediate pointers when they are chained: a->b->c. This chain could
be longer and hard to track the type from the previous variable. If
compiler could generate (artificial) debug entries for the intermediate
pointers with a precise location expression and type info, it would be
really helpful.
And I plan to improve the analysis in perf tools with better integration
to the existing command like perf mem and/or perf c2c. It'd be pretty
interesting to see per-struct or per-field access patterns both for load
and store event at the same time. Also using data-source or snoop info
for each struct/field would give some insights on optimizing memory
usage or layout.
There are kernel specific issues too. Some per-cpu variable accesses
created complex instruction patterns so it was hard to determine which
data/type it accessed. For now, it just parsed simple patterns for
this-cpu access using %gs segment register. Also it should handle
self-modifying codes like kprobe, ftrace, live patch and so on. I guess
they would usually create an out-of-line copy of modified instructions
but needs more checking. And I have no idea about the status of struct
layout randomization and the DWARF info of the resulting struct. Maybe
there are more issues I'm not aware of, please let me know if you notice
something.
* Summary
Despite all the issues, I believe this would be a good addition to our
performance toolset. It would help to observe memory overheads in a
different angle and to optimize the memory usage. I'm really looking
forward to hearing any feedback.
The code is available at 'perf/data-profile-v1' branch in
git://git.kernel.org/pub/scm/linux/kernel/git/namhyung/linux-perf.git
Enjoy,
Namhyung
Cc: Ben Woodard <woodard@xxxxxxxxxx>
Cc: Joe Mario <jmario@xxxxxxxxxx>
CC: Kees Cook <keescook@xxxxxxxxxxxx>
Cc: David Blaikie <blaikie@xxxxxxxxxx>
Cc: Xu Liu <xliuprof@xxxxxxxxxx>
Cc: Kan Liang <kan.liang@xxxxxxxxxxxxxxx>
Cc: Ravi Bangoria <ravi.bangoria@xxxxxxx>
Namhyung Kim (48):
perf annotate: Move raw_comment and raw_func_start
perf annotate: Check if operand has multiple regs
perf tools: Add util/debuginfo.[ch] files
perf dwarf-aux: Fix die_get_typename() for void *
perf dwarf-aux: Move #ifdef code to the header file
perf dwarf-aux: Add die_get_scopes() helper
perf dwarf-aux: Add die_find_variable_by_reg() helper
perf dwarf-aux: Factor out __die_get_typename()
perf dwarf-regs: Add get_dwarf_regnum()
perf annotate-data: Add find_data_type()
perf annotate-data: Add dso->data_types tree
perf annotate: Factor out evsel__get_arch()
perf annotate: Add annotate_get_insn_location()
perf annotate: Implement hist_entry__get_data_type()
perf report: Add 'type' sort key
perf report: Support data type profiling
perf annotate-data: Add member field in the data type
perf annotate-data: Update sample histogram for type
perf report: Add 'typeoff' sort key
perf report: Add 'symoff' sort key
perf annotate: Add --data-type option
perf annotate: Add --type-stat option for debugging
perf annotate: Add --insn-stat option for debugging
perf annotate-data: Parse 'lock' prefix from llvm-objdump
perf annotate-data: Handle macro fusion on x86
perf annotate-data: Handle array style accesses
perf annotate-data: Add stack operation pseudo type
perf dwarf-aux: Add die_find_variable_by_addr()
perf annotate-data: Handle PC-relative addressing
perf annotate-data: Support global variables
perf dwarf-aux: Add die_get_cfa()
perf annotate-data: Support stack variables
perf dwarf-aux: Check allowed DWARF Ops
perf dwarf-aux: Add die_collect_vars()
perf dwarf-aux: Handle type transfer for memory access
perf annotate-data: Introduce struct data_loc_info
perf map: Add map__objdump_2rip()
perf annotate: Add annotate_get_basic_blocks()
perf annotate-data: Maintain variable type info
perf annotate-data: Add update_insn_state()
perf annotate-data: Handle global variable access
perf annotate-data: Handle call instructions
perf annotate-data: Implement instruction tracking
perf annotate: Parse x86 segment register location
perf annotate-data: Handle this-cpu variables in kernel
perf annotate-data: Track instructions with a this-cpu variable
perf annotate-data: Add stack canary type
perf annotate-data: Add debug message
tools/perf/Documentation/perf-report.txt | 3 +
.../arch/loongarch/annotate/instructions.c | 6 +-
tools/perf/arch/x86/util/dwarf-regs.c | 38 +
tools/perf/builtin-annotate.c | 149 +-
tools/perf/builtin-report.c | 19 +-
tools/perf/util/Build | 2 +
tools/perf/util/annotate-data.c | 1246 +++++++++++++++++
tools/perf/util/annotate-data.h | 222 +++
tools/perf/util/annotate.c | 763 +++++++++-
tools/perf/util/annotate.h | 104 +-
tools/perf/util/debuginfo.c | 205 +++
tools/perf/util/debuginfo.h | 64 +
tools/perf/util/dso.c | 4 +
tools/perf/util/dso.h | 2 +
tools/perf/util/dwarf-aux.c | 561 +++++++-
tools/perf/util/dwarf-aux.h | 86 +-
tools/perf/util/dwarf-regs.c | 33 +
tools/perf/util/hist.h | 3 +
tools/perf/util/include/dwarf-regs.h | 11 +
tools/perf/util/map.c | 20 +
tools/perf/util/map.h | 3 +
tools/perf/util/probe-finder.c | 193 +--
tools/perf/util/probe-finder.h | 19 +-
tools/perf/util/sort.c | 195 ++-
tools/perf/util/sort.h | 7 +
tools/perf/util/symbol_conf.h | 4 +-
26 files changed, 3703 insertions(+), 259 deletions(-)
create mode 100644 tools/perf/util/annotate-data.c
create mode 100644 tools/perf/util/annotate-data.h
create mode 100644 tools/perf/util/debuginfo.c
create mode 100644 tools/perf/util/debuginfo.h
base-commit: 87cd3d48191e533cd9c224f2da1d78b3513daf47
--
2.42.0.655.g421f12c284-goog
|