ethernet cards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3c59x debug=1 options=1,,12
That works  on my system with 2 cards.
Barry

On Sun, 23 Nov 2003, Geoff Shang wrote:

> Alex Snow wrote:
>
> > my question is how can I tell the 3c59x module which irq to use for
> > which card? these are both pci network cards ...
>
> The device driver doesn't do this.  The IRQ is allocated by either LInux or
> the BIOS, depending on which does the PCI setup.  I admit to not knowing
> much about all this.   I personally would like to know how to reserve IRQs
> if you want LInux to do the PCI setup.  Perhaps someone else on here knows
> more.
>
> Geoff.
>
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>




[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]
  Powered by Linux