I got the problem solved. I just had to be a litte more patient upon bootup. (I got smart and viewed dmesg.) I also switched serial ports, that seemed to speed it up a little. One thing I do know is that the client will want it to talk faster. Thanks for all the help!! Josh -----Original Message----- From: speakup-admin@xxxxxxxxxxxxxx [mailto:speakup-admin at braille.uwo.ca]On Behalf Of Tommy Moore Sent: Tuesday, August 28, 2001 5:29 PM To: speakup at braille.uwo.ca Subject: Re: LiteTalk 3.22 problem Hi Josh. when you installed speakup on the machine did you use the stable 0.10a version or did you use the cvs version? Actually since this is a Red Hat machine you can use the kernel rpm packages that have speakup enabled in them from: http://198.172.228.165/rh7.1/RedHat/RPMS All you have to add to the lilo command line is append = "speakup_synth=ltlk" Hopefully this should work. If not try adding the speakup_ser=0 option to the line as well. Tommy _______________________________________________ Speakup mailing list Speakup at braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup
