Hi Claudiu,
On Mon, Jan 20, 2025 at 2:09 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Add DT overlay for SCIF1 (of the Renesas RZ/G3S SoC) routed through the
> PMOD1_3A interface available on the Renesas RZ SMARC Carrier II board.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> ---
>
> Changes in v4:
> - rename overlay name to r9a08g045s33-smarc-pmod1-type-3a
> - add note about the needed switches for SCIF1
> - guard the scif1 node with #if SW_CONFIG3 == SW_ON && SW_OPT_MUX4 == SW_ON
> - dropped the alias section from the overlay file and move it
> the board file
> - document SW_OPT_MUX4 switch
Thanks for the update!
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc-pmod1-type-3a.dtso
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0
Would you mind if I changed this to (GPL-2.0-only OR BSD-2-Clause) while
applying?
> +&pinctrl {
> + scif1_pins: scif1-pins {
> + pinmux = <RZG2L_PORT_PINMUX(14, 0, 1)>, /* TXD */
> + <RZG2L_PORT_PINMUX(14, 1, 1)>, /* RXD */
> + <RZG2L_PORT_PINMUX(16, 0, 1)>, /* CTS */
> + <RZG2L_PORT_PINMUX(16, 1, 1)>; /* RTS */
CTS# and RTS#
> + };
> +};
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v6.15.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
