Hi Nuno, On Thu, Oct 17, 2019 at 11:19 AM Nuno Gonçalves <nunojpg@xxxxxxxxx> wrote: > > Hi Yegor, > > I'm not sure if by your previous message you think I have some kind of > hardware or DT issue or if this is being handled as a regression. There were some upstreamed fixes recently. See commits [1], [2]. Also, make sure DMA for OMAP-8250 driver is disabled. Let me know if RTS/CTS is working as expected on am335x. See this discussion [3]. [1] https://marc.info/?l=linux-kernel&m=157037963426476&w=2 [2] https://marc.info/?l=linux-kernel&m=157037964726483&w=2 [3] https://marc.info/?l=linux-omap&m=157018333915769&w=2 Yegor > Thanks, > Nuno > > On Tue, Oct 1, 2019 at 11:03 PM Nuno Gonçalves <nunojpg@xxxxxxxxx> wrote: > > > > Yes, I remember seeing those warnings. > > > > On Tue, Oct 1, 2019 at 10:02 PM Yegor Yefremov > > <yegorslists@xxxxxxxxxxxxxx> wrote: > > > > > > Hi Nuno, > > > > > > On Sun, Sep 29, 2019 at 8:46 AM Nuno Gonçalves <nunojpg@xxxxxxxxx> wrote: > > > > > > > > I have since found that I am affected by two apparently different > > > > regressions since 5.3. > > > > > > > > 4a96895f74c9633b51427fd080ab70fa62b65bc4 is only confirmed to affect > > > > me on a omap8250 where the issue is that there are a few char errors > > > > every few seconds. I can't confirm if chars are added, removed or > > > > changed, for now I only can confirm my state machine looses tracking. > > > > > > Can you see kernel warnings about an overrun on OMAP UART? > > > > > > > I will make a separate report from the problem identified on sunxi. > > > > > > > > On Sat, Sep 28, 2019 at 7:59 AM Nuno Gonçalves <nunojpg@xxxxxxxxx> wrote: > > > > > > > > > > On 32 bit arm platforms (am335x and sunxi) I get unexpected bytes on > > > > > serial ports after this commit. > > > > > > > > > > I use CTS (so: for input flow control). > > > > > > > > > > I've observed two different issues, one where I get just a few missed > > > > > or added bytes about once a minute, and another where I get totally > > > > > unexpected chars until I reopen the port. > > > > > > > > > > I will have a hard time to analyse and give a better description of > > > > > how exactly the port is failing, so maybe you have a idea of what is > > > > > the issue with this patch. > > > > > > > > > > I've reverted this on top of 5.3.1 and consistently got the issue fixed. > > > > > > > > > > Thanks, > > > > > Nuno > > > > > > > > > > commit 4a96895f74c9633b51427fd080ab70fa62b65bc4 > > > > > Author: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> > > > > > Date: Thu Jun 20 08:24:20 2019 +0200 > > > > > > > > > > tty/serial/8250: use mctrl_gpio helpers > > > > > > > > > > This patch permits the usage for GPIOs to control > > > > > the CTS/RTS/DTR/DSR/DCD/RI signals. > > > > > > > > > > Changed by Stefan: > > > > > Only call mctrl_gpio_init(), if the device has no ACPI companion device > > > > > to not break existing ACPI based systems. Also only use the mctrl_gpio_ > > > > > functions when "gpios" is available. > > > > > > > > > > Use MSR / MCR <-> TIOCM wrapper functions. > > > > > > > > > > Signed-off-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> > > > > > Signed-off-by: Stefan Roese <sr@xxxxxxx> > > > > > Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > > > > > Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> > > > > > Tested-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> > > > > > Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> > > > > > Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > > > > > Cc: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx> > > > > > Cc: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx> > > > > > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > > > > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
