[PATCH 0/5] tty/serial: at91: fix atmel_serial_probe(), dma_sync_* and the Hardware Handshaking support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series of patches fix many bugs:
- a wrong enum type was used when calling dma_sync_*_for_cpu() and
  dma_sync_*_for_device()
- IO accesses to registers were done in atmel_serial_probe() after the
  peripheral clock had been disabled.
- the -EDEFER error was not handled properly in atmel_serial_probe()
- the Hardware Handshaking mode could never be enabled to control the RTS line

The patches were made from the next-20141205 tag of the linux-next repository.
They were tested on a SAMA5Dx FPGA platform.

Cyrille Pitchen (5):
  tty/serial: at91: use correct type for dma_sync_*_for_cpu() and
    dma_sync_*_for_device()
  tty/serial: at91: enable peripheral clock before accessing I/O
    registers
  tty/serial: at91: fix error handling in atmel_serial_probe()
  tty/serial: at91: fix RTS line management when hardware handshake is
    enabled
  tty/serial: at91: fix typo and indentation

 drivers/tty/serial/atmel_serial.c | 153 +++++++++++++++++++++++++-------------
 1 file changed, 101 insertions(+), 52 deletions(-)

-- 
1.8.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux