Hi Guys,
This patch attempts to add several features and fix issues existing
in imx UART driver.
Tested-ON: i.MX6Q SabreAuto board.
Anton Bondarenko (1):
serial: imx: initialized DMA w/o HW flow enabled
Dirk Behme (6):
serial: imx: remove unneeded imx_transmit_buffer() from imx_start_tx()
serial: imx: TX DMA: clean up sg initialization
serial: imx: unmap sg in case of dmaengine_prep_slave_sg() failure
serial: imx: unmap scatter gather list in imx_flush_buffer
serial: imx: use dma_is_txing to synchronize dma_tx_callback and
imx_dma_tx
serial: imx: disable TDMAEN in imx_flush_buffer()
Jiada Wang (7):
serial: imx: add CREAD flag support
serial: imx: use locking to stop concurrent access of UCR1
Revert "serial: imx: always wake up the processes in the TX callback"
serial: imx: call imx_dma_tx() again in dma_tx_callback
serial: imx: Enable UCR4_OREN in startup interface
serial: imx: Fix issue in software flow control
serial: imx: Support sw flow control in DMA mode
Robin Gong (1):
serial: imx: start rx_dma once RXFIFO is not empty
drivers/tty/serial/imx.c | 160 +++++++++++++++++++++++++++++++++++++----------
1 file changed, 126 insertions(+), 34 deletions(-)
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
