[PATCH v2 00/29] Add OF support to the sh-sci serial port driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This is the second version of the patch set adds device tree bindings for the
sh sci serial port devices and adds OF parsing to the sh-sci driver.

The bindings are based on Bastian Hecht's proposal (see
http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach taken
here is more minimalistic: instead of describing all hardware characteristics
that vary between the SCI device revisions in DT (such as registers layout),
that information is stored in the driver and selected based on the compatible
property value. Only SCI revisions used on ARM devices are supported through
DT, as DT support for SuperH is nowhere down the line.

Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to 27/29
replace memory and interrupt resources passed through platform data with
platform resources. Beside replacing a custom mechanism with a standard one,
it will also make the DT parsing code simpler as resource allocation will be
shared between DT and non-DT code paths. Finally, patches 28/29 to 29/29 add
OF parsing to the sh-sci driver and create DT bindings documentation.

The patches have been test on a Lager board (r8a7790-based). Support for other
SoCs will be added as needed. Note that all current Renesas ARM SoCs seem to
be compatible with the generic (H)SCI(F)(AB) devices, but the plan is for
their DT bindings to list the SoC-specific version in case incompatibilities
are found later.

Patch 08/29 ("serial: sh-sci: Support resources passed through platform
resources") is the only dependency of the arch/arm and arch/sh patches present
in this series. As it's too late to get it in v3.13, Simon will need a stable
branch of the linux serial tree with that patch included.

Changes compared to v1:

- Patches 04/29 to 27/29 have been added
- Multi-interrupt support has been removed from the DT bindings as they don't
  support any SoC requiring multi-interrupt yet

Cc: devicetree@xxxxxxxxxxxxxxx

Bastian Hecht (1):
  serial: sh-sci: Add OF support

Laurent Pinchart (28):
  serial: sh-sci: Sort headers alphabetically
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Support resources passed through platform resources
  ARM: shmobile: sh7372: Use macros to declare SCIF devices
  ARM: shmobile: sh73a0: Use macros to declare SCIF devices
  ARM: shmobile: r8a7740: Use macros to declare SCIF devices
  ARM: shmobile: r8a7779: Use macros to declare SCIF devices
  ARM: shmobile: r7s72100: Don't define SCIF platform data in an array
  ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array
  ARM: shmobile: r8a7778: Don't define SCIF platform data in an array
  ARM: shmobile: r8a7790: Don't define SCIF platform data in an array
  ARM: shmobile: r8a7791: Don't define SCIF platform data in an array
  ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources
  ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources
  ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as
    resources
  sh: Declare SCIF register base and IRQ as resources
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Add device tree bindings documentation

 .../bindings/serial/renesas,sci-serial.txt         |  42 ++++
 arch/arm/mach-shmobile/setup-r7s72100.c            |  63 +++---
 arch/arm/mach-shmobile/setup-r8a73a4.c             |  65 +++---
 arch/arm/mach-shmobile/setup-r8a7740.c             | 196 +++--------------
 arch/arm/mach-shmobile/setup-r8a7778.c             |  45 ++--
 arch/arm/mach-shmobile/setup-r8a7779.c             | 129 +++--------
 arch/arm/mach-shmobile/setup-r8a7790.c             | 117 +++++-----
 arch/arm/mach-shmobile/setup-r8a7791.c             | 130 +++++------
 arch/arm/mach-shmobile/setup-sh7372.c              | 161 +++-----------
 arch/arm/mach-shmobile/setup-sh73a0.c              | 192 +++--------------
 arch/sh/kernel/cpu/sh2/setup-sh7619.c              |  27 ++-
 arch/sh/kernel/cpu/sh2a/setup-mxg.c                |   9 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7201.c             |  72 +++++--
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c             |  36 +++-
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c             |  36 +++-
 arch/sh/kernel/cpu/sh2a/setup-sh7264.c             |  96 +++++++--
 arch/sh/kernel/cpu/sh2a/setup-sh7269.c             |  96 +++++++--
 arch/sh/kernel/cpu/sh3/setup-sh7705.c              |  18 +-
 arch/sh/kernel/cpu/sh3/setup-sh770x.c              |  27 ++-
 arch/sh/kernel/cpu/sh3/setup-sh7710.c              |  18 +-
 arch/sh/kernel/cpu/sh3/setup-sh7720.c              |  18 +-
 arch/sh/kernel/cpu/sh4/setup-sh4-202.c             |  15 +-
 arch/sh/kernel/cpu/sh4/setup-sh7750.c              |  18 +-
 arch/sh/kernel/cpu/sh4/setup-sh7760.c              |  58 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c             |  36 +++-
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c             |   9 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c             |  27 ++-
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c             |  54 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7724.c             |  54 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7734.c             |  66 ++++--
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c             |  27 ++-
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c             |  27 ++-
 arch/sh/kernel/cpu/sh4a/setup-sh7770.c             |  90 ++++++--
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c             |  18 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c             |  54 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c             |  82 +++++--
 arch/sh/kernel/cpu/sh4a/setup-shx3.c               |  45 ++--
 arch/sh/kernel/cpu/sh5/setup-sh5.c                 |  11 +-
 drivers/tty/serial/sh-sci.c                        | 238 ++++++++++++++++-----
 include/linux/serial_sci.h                         |  35 +--
 40 files changed, 1443 insertions(+), 1114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux