Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm/mach-shmobile/setup-r8a7791.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 8eb9373..557db8f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -87,11 +87,14 @@ void __init r8a7791_pinmux_init(void)
#define __R8A7791_SCIF(scif_type, algo, index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
.type = scif_type, \
- .mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scbrr_algo_id = algo, \
.scscr = SCSCR_RE | SCSCR_TE, \
- .irqs = SCIx_IRQ_MUXED(irq), \
+}; \
+ \
+static struct resource scif##index##_resources[] = { \
+ DEFINE_RES_MEM(baseaddr, 0x100), \
+ DEFINE_RES_IRQ(irq), \
}
#define R8A7791_SCIF(index, baseaddr, irq) \
@@ -120,9 +123,11 @@ R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */
R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */
#define r8a7791_register_scif(index) \
- platform_device_register_data(&platform_bus, "sh-sci", index, \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
+ platform_device_register_resndata(&platform_bus, "sh-sci", index, \
+ scif##index##_resources, \
+ ARRAY_SIZE(scif##index##_resources), \
+ &scif##index##_platform_data, \
+ sizeof(scif##index##_platform_data))
static const struct sh_timer_config cmt00_platform_data __initconst = {
.name = "CMT00",
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
