Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm/mach-shmobile/setup-r8a73a4.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 605298b..ef32ce2 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -43,11 +43,14 @@ void __init r8a73a4_pinmux_init(void)
#define R8A73A4_SCIF(scif_type, _scscr, index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
.type = scif_type, \
- .mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scbrr_algo_id = SCBRR_ALGO_4, \
.scscr = _scscr, \
- .irqs = SCIx_IRQ_MUXED(irq), \
+}; \
+ \
+static struct resource scif##index##_resources[] = { \
+ DEFINE_RES_MEM(baseaddr, 0x100), \
+ DEFINE_RES_IRQ(irq), \
}
#define R8A73A4_SCIFA(index, baseaddr, irq) \
@@ -66,9 +69,11 @@ R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */
#define r8a73a4_register_scif(index) \
- platform_device_register_data(&platform_bus, "sh-sci", index, \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
+ platform_device_register_resndata(&platform_bus, "sh-sci", index, \
+ scif##index##_resources, \
+ ARRAY_SIZE(scif##index##_resources), \
+ &scif##index##_platform_data, \
+ sizeof(scif##index##_platform_data))
static const struct renesas_irqc_config irqc0_data = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
