The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm/mach-shmobile/setup-r8a73a4.c | 58 +++++++++++++++-------------------
1 file changed, 26 insertions(+), 32 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index cc94b64..605298b 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -40,41 +40,35 @@ void __init r8a73a4_pinmux_init(void)
ARRAY_SIZE(pfc_resources));
}
-#define SCIF_COMMON(scif_type, baseaddr, irq) \
+#define R8A73A4_SCIF(scif_type, _scscr, index, baseaddr, irq) \
+static struct plat_sci_port scif##index##_platform_data = { \
.type = scif_type, \
.mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scbrr_algo_id = SCBRR_ALGO_4, \
- .irqs = SCIx_IRQ_MUXED(irq)
-
-#define SCIFA_DATA(index, baseaddr, irq) \
-[index] = { \
- SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
+ .scscr = _scscr, \
+ .irqs = SCIx_IRQ_MUXED(irq), \
}
-#define SCIFB_DATA(index, baseaddr, irq) \
-[index] = { \
- SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
- .scscr = SCSCR_RE | SCSCR_TE, \
-}
+#define R8A73A4_SCIFA(index, baseaddr, irq) \
+ R8A73A4_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
+ index, baseaddr, irq)
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
+#define R8A73A4_SCIFB(index, baseaddr, irq) \
+ R8A73A4_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \
+ index, baseaddr, irq)
-static const struct plat_sci_port scif[] = {
- SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
- SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
- SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
- SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
- SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
- SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
-};
+R8A73A4_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
+R8A73A4_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
+R8A73A4_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
+R8A73A4_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
+R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
+R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */
-static inline void r8a73a4_register_scif(int idx)
-{
- platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
- sizeof(struct plat_sci_port));
-}
+#define r8a73a4_register_scif(index) \
+ platform_device_register_data(&platform_bus, "sh-sci", index, \
+ &scif##index##_platform_data, \
+ sizeof(scif##index##_platform_data))
static const struct renesas_irqc_config irqc0_data = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
@@ -192,12 +186,12 @@ static struct resource cmt10_resources[] = {
void __init r8a73a4_add_dt_devices(void)
{
- r8a73a4_register_scif(SCIFA0);
- r8a73a4_register_scif(SCIFA1);
- r8a73a4_register_scif(SCIFB0);
- r8a73a4_register_scif(SCIFB1);
- r8a73a4_register_scif(SCIFB2);
- r8a73a4_register_scif(SCIFB3);
+ r8a73a4_register_scif(0);
+ r8a73a4_register_scif(1);
+ r8a73a4_register_scif(2);
+ r8a73a4_register_scif(3);
+ r8a73a4_register_scif(4);
+ r8a73a4_register_scif(5);
r8a7790_register_cmt(10);
}
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
