Re: Booting from or using a Compaq RA4100 Array

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>>>>> "Mark" == Mark Schaefer <mark@xxxxxxxxxxxxxxxx> writes:

Mark> 	Also, any info on the Tachyon chips would be helpful.  I have
Mark> a TS and a HPFC-5000C (32-bit old chip).

HPFC-5000 is the original HP Tachyon design which my driver won't
support.  It doesn't have FCP support in hardware or anything.  My
driver only does TachLite.

My aim is to support the following boards:

HP A5156A	HPFC-5100 /2.0	(TL)
HP A5157A	HPFC-5100B/2.2	(TL) dual port
HP A5158A	HPFC-5100C/2.3	(TL)
HP A5158A	HPFC-5100D/3.0	(TL)
HP A6795A	HPFC-5200C/2.2	(XL2)
Compaq FC HBA   HPFC-5166A/1.2  (TS)

The Compaq FC HBA is the one that the RA-4x00 people have.  I don't
have this controller yet but there should be one waiting for me at the
post office once the world goes out of suspend mode tomorrow...

-- 
Martin K. Petersen      http://mkp.net/
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux