[PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support

[Geert Uytterhoeven <geert+renesas@xxxxxxxxx>]

SPI EEPROMs typically support both SPI Mode 0 (CPOL=CPHA=0) and Mode 3
(CPOL=CPHA=1).  However, using the latter is currently flagged as an
error by "make dtbs_check", e.g.:

    arch/arm/boot/dts/r8a7791-koelsch.dtb: flash@0: Unevaluated properties are not allowed ('spi-cpha', 'spi-cpol' were unexpected)
	    From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml

Fix this by documenting support for CPOL=CPHA=1.

Fixes: 233363aba72ac638 ("spi/panel: dt-bindings: drop CPHA and CPOL from common properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index f86255ce13af0871..bb62ac4585822982 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -76,6 +76,13 @@ properties:
       If "broken-flash-reset" is present then having this property does not
       make any difference.
 
+  spi-cpol: true
+  spi-cpha: true
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
 unevaluatedProperties: false
 
 examples:
-- 
2.34.1