Re: [PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Miquel,

Would you please take this through mtd/fixes?

On 14.02.2023 16:26, Geert Uytterhoeven wrote:
> SPI EEPROMs typically support both SPI Mode 0 (CPOL=CPHA=0) and Mode 3
> (CPOL=CPHA=1).  However, using the latter is currently flagged as an
> error by "make dtbs_check", e.g.:
> 
>     arch/arm/boot/dts/r8a7791-koelsch.dtb: flash@0: Unevaluated properties are not allowed ('spi-cpha', 'spi-cpol' were unexpected)
> 	    From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
> 
> Fix this by documenting support for CPOL=CPHA=1.
>

Would be good if you can amend the commit message to Cc stable:
Cc: <stable@xxxxxxxxxxxxxxx>

> Fixes: 233363aba72ac638 ("spi/panel: dt-bindings: drop CPHA and CPOL from common properties")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Reviewed-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>

Cheers,
ta



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux