[PATCH 2/2] arm64: dts: renesas: draak: Add overlay for CVBS input

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

The Draak board has an ADV7180 CVBS decoder and an ADV7612 HDMI decoder,
both connected to the same VIN input. DIP switches are used to select
one of the two devices, with the HDMI decoder being the default. Add an
overlay that selects the CVBS decoder.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
[Niklas: Inverted it from HDMI to CVBS]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../boot/dts/renesas/draak-cvbs-input.dtso    | 33 +++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 0699b51c1247..f5df37253184 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -87,5 +87,6 @@ dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-cvbs-input.dtbo
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso b/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso
new file mode 100644
index 000000000000..b833c58c2029
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Ideas on Board Oy
+ *
+ * Device tree overlay for the Draak board, to enable CVBS input. This requires
+ * setting DIP switches SW49, SW50, SW51 and SW52 to OFF, and SW53 and SW54 to
+ * ON.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&adv7180_out {
+	remote-endpoint = <&vin4_in>;
+};
+
+&i2c0 {
+	hdmi-decoder@4c {
+		ports {
+			port@2 {
+				/delete-node/ endpoint;
+			};
+		};
+	};
+};
+
+&vin4_in {
+	remote-endpoint = <&adv7180_out>;
+};
+
+&vin4_pins {
+	groups = "vin4_data8", "vin4_sync", "vin4_clk";
+};
-- 
2.39.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux