Most Gen3 R-Car devices have HDMI as the default video input source,
align Draak with them and make HDMI the default. While at it move the
bus properties to the VIN node where they can be consumed correctly by
the driver.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/draak.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index ef3bb835d5c0..e248866c7871 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -356,11 +356,10 @@ port@3 {
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
- * CVBS is the default selection, link it to
- * VIN4 here.
+ * HDMI is the default selection, leave CVBS
+ * not connected here.
*/
adv7180_out: endpoint {
- remote-endpoint = <&vin4_in>;
};
};
};
@@ -423,13 +422,11 @@ port@2 {
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
- * CVBS is the default selection, leave HDMI
- * not connected here.
+ * HDMI is the default selection, link it to
+ * VIN4 here.
*/
adv7612_out: endpoint {
- pclk-sample = <0>;
- hsync-active = <0>;
- vsync-active = <0>;
+ remote-endpoint = <&vin4_in>;
};
};
};
@@ -580,8 +577,8 @@ usb0_pins: usb0 {
function = "usb0";
};
- vin4_pins_cvbs: vin4 {
- groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ vin4_pins: vin4 {
+ groups = "vin4_data24", "vin4_sync", "vin4_clk";
function = "vin4";
};
};
@@ -729,7 +726,7 @@ &usb2_phy0 {
};
&vin4 {
- pinctrl-0 = <&vin4_pins_cvbs>;
+ pinctrl-0 = <&vin4_pins>;
pinctrl-names = "default";
status = "okay";
@@ -737,7 +734,10 @@ &vin4 {
ports {
port {
vin4_in: endpoint {
- remote-endpoint = <&adv7180_out>;
+ pclk-sample = <0>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ remote-endpoint = <&adv7612_out>;
};
};
};
--
2.39.1
