On Sat, Oct 01, 2022 at 06:03:37PM +0000, Biju Das wrote:
> > What is the configuration when 32-bit phase counting mode is selected?
>
> LWA Bit (MTU1/MTU2 Combination Longword Access Control) needs to set for 32-bit phase counting mode.
>
> b0 LWA 0 R/W MTU1/MTU2 Combination Longword Access Control
> 0: 16-bit access is enabled.
> 1: 32-bit access is enabled.
>
> > Does MTCLKA and MTCLKB serve as the counting signals in this case,
>
> For 16-bit and 32-bit counting signals same. We can set
>
> 1) MTU 1 and MTU2 signals as MTCLKA and MTCLKB
>
> Or
>
> 2) MTU 1 signal as MTCLKA and MTCLKB and MTU2 signals as MTCLKC and MTCLKD
I'm having trouble understanding this case. If 32-bit access is enabled
by setting the LWA bit, and the MTU1 signals are configured as MTCLKA
and MTCLKB while at the same time the MTU2 signals are configured as
MTCLKC and MTCLKD, how is the 32-bit count value determined -- wouldn't
MTU1 and MTU2 be counting independently if they each had separate input
clocks fed to them?
William Breathitt Gray
>
>
> b1 PHCKSEL 1 R/W External Input Phase Clock Select
> Selects the external clock pin for phase counting mode.
> 0: MTCLKA and MTCLKB are selected for the external phase clock.
> 1: MTCLKC and MTCLKD are selected for the external phase clock
>
> > with overflows on the MTU1 register incrementing the MTU2 register?
>
> No. that won't happen as we need to use different register for Long word access
>
> These are the regiters used
> 16-bit:- TCNT{MTU1,MTU2}, TGRA{MTU1,MTU2}, and TGRB{MTU1,MTU2},
> 32-bit:- MTU1.TCNT_1_LW, MTU1.TGRA_1_LW and MTU1.TGRB_1_LW
>
> Counter in MTU1 MTU1.TCNT Word MTU1.TCNT_1_LW Longword
> Counter in MTU2 MTU2.TCNT Word
>
> General register A in MTU1 MTU1.TGRA Word MTU1.TGRA_1_LW Longword
> General register A in MTU2 MTU2.TGRA Word
>
> General register B in MTU1 MTU1.TGRB Word MTU1.TGRB_1_LW Longword
> General register B in MTU2 MTU2.TGRB Word
>
> Cheers,
> Biju
Attachment:
signature.asc
Description: PGP signature
