Hi Laurent,
On Wed, Dec 1, 2021 at 6:29 AM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> On Tue, Nov 30, 2021 at 04:43:09PM +0000, Kieran Bingham wrote:
> > Provide the DT nodes for the DSI found on the r8a779a0, and extend the
> > falcon-cpu board add on with the TI SN65DSI86 bridge which is used to
> > connect the DSI output to the mini display-port connector on the Falcon
> > CPU board.
> >
> > This has been successfully tested on a Falcon-V3U with patches to the
> > rcar_du and sn65dsi86 which will be sent separately.
> >
> > Since the previous version, the core "r8a779a0: Add DU support" has
> > already been accepted into the renesas-drivers tree, and the "r8a779a0:
> > Provide default DSI data-lanes" patch has been dropped in favour of a
> > better construction in the two patches supplied here.
>
> I've reposted the DSI driver and its bindings, and unless something goes
> terribly wrong, I'll send a pull request in a couple of days.
>
> Geert, how would you like to proceed with the DT changes ?
I can take the DTS changes as soon as the DT bindings have been
accepted in linux-next.
Thanks!
> > Kieran Bingham (2):
> > arm64: dts: renesas: r8a779a0: Add DSI encoders
> > arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output
> >
> > .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 79 +++++++++++++++++++
> > arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 60 ++++++++++++++
> > 2 files changed, 139 insertions(+)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
