[PATCH v5 0/2] arm64: dts: renesas: r8a779a0 DU support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Provide the DT nodes for the DSI found on the r8a779a0, and extend the
falcon-cpu board add on with the TI SN65DSI86 bridge which is used to
connect the DSI output to the mini display-port connector on the Falcon
CPU board.

This has been successfully tested on a Falcon-V3U with patches to the
rcar_du and sn65dsi86 which will be sent separately.

Since the previous version, the core "r8a779a0: Add DU support" has
already been accepted into the renesas-drivers tree, and the "r8a779a0:
Provide default DSI data-lanes" patch has been dropped in favour of a
better construction in the two patches supplied here.

Kieran Bingham (2):
  arm64: dts: renesas: r8a779a0: Add DSI encoders
  arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output

 .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 79 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi     | 60 ++++++++++++++
 2 files changed, 139 insertions(+)

-- 
2.30.2




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux