Hi Kieran, On Tue, Nov 30, 2021 at 04:43:09PM +0000, Kieran Bingham wrote: > Provide the DT nodes for the DSI found on the r8a779a0, and extend the > falcon-cpu board add on with the TI SN65DSI86 bridge which is used to > connect the DSI output to the mini display-port connector on the Falcon > CPU board. > > This has been successfully tested on a Falcon-V3U with patches to the > rcar_du and sn65dsi86 which will be sent separately. > > Since the previous version, the core "r8a779a0: Add DU support" has > already been accepted into the renesas-drivers tree, and the "r8a779a0: > Provide default DSI data-lanes" patch has been dropped in favour of a > better construction in the two patches supplied here. I've reposted the DSI driver and its bindings, and unless something goes terribly wrong, I'll send a pull request in a couple of days. Geert, how would you like to proceed with the DT changes ? > Kieran Bingham (2): > arm64: dts: renesas: r8a779a0: Add DSI encoders > arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output > > .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 79 +++++++++++++++++++ > arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 60 ++++++++++++++ > 2 files changed, 139 insertions(+) > -- Regards, Laurent Pinchart
