This patch series aims to add WDT driver support for RZ/G2L SoC's.
WDT has 3 channels
1) CH0 to check the operation of Cortex-A55-CPU Core0
2) CH1 to check the operation of Cortex-A55-CPU Core1
3) CH2 to check the operation of Cortex-M33 CPU
WDT IP supports
1) Normal Watchdog Timer Function
2) Reset Request Function due to CPU Parity Error
Once the software activates the watchdog timer, the watchdog timer does
not stop until it is reset.
Current driver supports Normal Watchdog Timer basic functionality.
Tested WDT driver with selftests tool and reboot command
All 3 channels tested with below command.
cat /dev/watchdog & for i in {1..60}; do sleep 1; echo $i; devmem2 0x12800808; done
cat /dev/watchdog1 & for i in {1..60}; do sleep 1; echo $i; devmem2 0x12800c08; done
cat /dev/watchdog2 & for i in {1..60}; do sleep 1; echo $i; devmem2 0x12800408; done
v4->v5:
* Started using the macros MICRO and USEC_PER_SEC
* Renamed rzg2l_wdt_get_cycle_msec() to rzg2l_wdt_get_cycle_usec()
* Fixed the value of priv->wdev.max_timeout in seconds.
V3->V4:
* Fixed the build issue reported by kernel test robot
V2->V3:
* Added Rb tag from Guenter Roeck
* Removed Removed patch#1, as the clock changes related to WDT reset selection
will be handled in TF-A.
V1->V2:
* started using clk_get/put instead of devm_clk_get/put
* Moved devm_add_action_or_reset after set_drvdata() and
* removed redundant action on devm_add_action_or_reset() failure.
RFC->V1
* Removed patch#3, the clk patch is queued for 5.17
* Added clock-names and interrupt-names as required properties for RZ/G2L
* Re-order clocknames with internal module clock first
* Removed pclk_rate from priv.
* rzg2l_wdt_write() returns void and Removed tiemout related to register update
* rzg2l_wdt_init_timeout() returns void and removed delays.
* removed set_bit(WDOG_HW_RUNNING,..) as we can stop watchdog
* renamed reset_assert_clock_disable->reset_assert_pm_disable_put
* started using devm_reset_control_get_exclusive()
* removed platform_set_drvdata(pdev, priv) as there is no user
* removed watchdog_set_restart_priority(&priv->wdev, 0) as 0 is the default.
* removed remove callback as it is empty.
Biju Das (2):
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: Add Watchdog Timer driver for RZ/G2L
.../bindings/watchdog/renesas,wdt.yaml | 75 +++--
drivers/watchdog/Kconfig | 8 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/rzg2l_wdt.c | 263 ++++++++++++++++++
4 files changed, 329 insertions(+), 18 deletions(-)
create mode 100644 drivers/watchdog/rzg2l_wdt.c
--
2.17.1
