Re: [PATCH 1/4] Documentation: dt-bindings: iio: Add max961x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lars-Peter,

On 24/02/2017 16:33, Lars-Peter Clausen wrote:
On 02/24/2017 04:22 PM, Geert Uytterhoeven wrote:
On Fri, Feb 24, 2017 at 4:05 PM, Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> wrote:
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/max961x.txt
@@ -0,0 +1,27 @@
+* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
+
+Maxim max9611/max9612 is an high-side current sense amplifier with integrated
+12-bits ADC communicating over I2c bus.
+The device node for this driver shall be a child of a I2c controller.
+
+Required properties
+  - compatible: Should be "maxim,max961x"
+  - reg: The 7-bits long I2c address of the device
+  - shunt-resistor: Resistor value, in uOhm, of the current sense shunt
+                   resistor.

shunt-resistor-micro-ohms?

I'll take this one further:

maxim,shunt-resistor-micro-ohms?

Although there is precedence for just 'shunt-resistor' in the ina2xx bindings.


And that's where I took "inspiration" from :)



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux