Re: [PATCH 1/4] Documentation: dt-bindings: iio: Add max961x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 24, 2017 at 4:05 PM, Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> wrote:
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/max961x.txt
> @@ -0,0 +1,27 @@
> +* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
> +
> +Maxim max9611/max9612 is an high-side current sense amplifier with integrated
> +12-bits ADC communicating over I2c bus.
> +The device node for this driver shall be a child of a I2c controller.
> +
> +Required properties
> +  - compatible: Should be "maxim,max961x"
> +  - reg: The 7-bits long I2c address of the device
> +  - shunt-resistor: Resistor value, in uOhm, of the current sense shunt
> +                   resistor.

shunt-resistor-micro-ohms?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux