Re: [PATCH 1/4] Documentation: dt-bindings: iio: Add max961x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/24/2017 04:22 PM, Geert Uytterhoeven wrote:
> On Fri, Feb 24, 2017 at 4:05 PM, Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> wrote:
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/max961x.txt
>> @@ -0,0 +1,27 @@
>> +* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
>> +
>> +Maxim max9611/max9612 is an high-side current sense amplifier with integrated
>> +12-bits ADC communicating over I2c bus.
>> +The device node for this driver shall be a child of a I2c controller.
>> +
>> +Required properties
>> +  - compatible: Should be "maxim,max961x"
>> +  - reg: The 7-bits long I2c address of the device
>> +  - shunt-resistor: Resistor value, in uOhm, of the current sense shunt
>> +                   resistor.
> 
> shunt-resistor-micro-ohms?

I'll take this one further:

maxim,shunt-resistor-micro-ohms?

Although there is precedence for just 'shunt-resistor' in the ina2xx bindings.




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux