> -----Original Message----- > From: Fabio Estevam [mailto:festevam@xxxxxxxxx] > Sent: Thursday, October 09, 2014 9:11 AM > To: Zhu Richard-R65037 > Cc: linux-pci-owner@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Guo Shawn- > R65073; Lucas Stach; Tim Harvey > Subject: Re: [PATCH v4 10/10] ARM: imx6sx: enable pcie on imx6sx sdb board > > On Wed, Oct 8, 2014 at 3:41 AM, Hong-Xing.Zhu@xxxxxxxxxxxxx <Hong- > Xing.Zhu@xxxxxxxxxxxxx> wrote: > > > This hunk is wrong. There is no "power-on-gpio" in the binding anymore. > > Also there is already a change in Shawns tree to model this as a always-on > regulator. If we really want to control pci bus power this needs to be done > through this regulator, not some arbitrary gpio hack. > > Yes, I never asked you to include 'power-on-gpio'. What needs to be done is > the same as in imx6qdl-sabresd, which passes the regulator that powers the PCI > slot. You can refer to Shawn's tree or linux-next. [Richard] Understand, thanks a lot. BTW, the email name change is still on-going, would be finished later. Best Regards Richard Zhu ��.n��������+%������w��{.n�����{���"�)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
