The 10th patch is not sent out properly, re-send the patch-set again. Main changes since the v3: 1. fix one potential assignment error of cfg start in designware driver when IORESOURCE_MEM "config" is represented as cfg space resource. 2. Use "config" cfg space in imx6sx pcie dts. 3. Add more descriptive in the imx6sx pcie binding. 4. Sort the pre-fix of the patch-set, then it would be easier for Bjorn and Shawn to merge them, after the patch-set is accepted. 5. rename the disp_axi clcok to pcie_inbound_axi. [PATCH v4 01/10] PCI: imx6: wait the clocks to stabilize after ref_en [PATCH v4 02/10] PCI: imx6: add imx6sx pcie support [PATCH v4 03/10] PCI: imx6: Fix possible dead lock [PATCH v4 04/10] PCI: designware: refine setup_rc and add msi data [PATCH v4 05/10] PCI: designware: fix one potential assignment error [PATCH v4 06/10] ARM: imx6qdl: enable pcie on imx6qdl sabreauto [PATCH v4 07/10] ARM: imx6: update dts and binding for imx6sx pcie [PATCH v4 08/10] ARM: imx6sx: add syscon into gpc dts [PATCH v4 09/10] ARM: imx6sx: add imx6sx pcie related gpr bits [PATCH v4 10/10] ARM: imx6sx: enable pcie on imx6sx sdb board -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
