Nirmal Patel <nirmal.patel@xxxxxxxxxxxxxxx> 於 2024年9月21日 週六 上午12:03寫道： > > On Mon, 12 Aug 2024 16:18:22 +0800 > Jian-Hong Pan <jhp@xxxxxxxxxxxxx> wrote: > > > Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> 於 2024年8月8日 週四 > > 下午5:49寫道： > > > > > > On Wed, 7 Aug 2024, David E. Box wrote: > > > > > > > On Wed, 2024-08-07 at 14:18 +0300, Ilpo Järvinen wrote: > > > > > On Wed, 7 Aug 2024, Jian-Hong Pan wrote: > > > > > > > > > > > David E. Box <david.e.box@xxxxxxxxxxxxxxx> 於 2024年8月6日 > > > > > > 週二 上午4:26寫道： > > > > > > > > > > > > > > Hi Jian-Hong, > > > > > > > > > > > > > > On Fri, 2024-08-02 at 16:24 +0800, Jian-Hong Pan wrote: > > > > > > > > Jian-Hong Pan <jhp@xxxxxxxxxxxxx> 於 2024年7月19日 週五 > > > > > > > > 下午4:04寫道： > > > > > > > > > > > > > > > > > > Currently, when enable link's L1.2 features with > > > > > > > > > __pci_enable_link_state(), > > > > > > > > > it configs the link directly without ensuring related > > > > > > > > > L1.2 parameters, such > > > > > > > > > as T_POWER_ON, Common_Mode_Restore_Time, and > > > > > > > > > LTR_L1.2_THRESHOLD have been > > > > > > > > > programmed. > > > > > > > > > > > > > > > > > > This leads the link's L1.2 between PCIe Root Port and > > > > > > > > > child device gets > > > > > > > > > wrong configs when a caller tries to enabled it. > > > > > > > > > > > > > > > > > > Here is a failed example on ASUS B1400CEAE with enabled > > > > > > > > > VMD: > > > > > > > > > > > > > > > > > > 10000:e0:06.0 PCI bridge: Intel Corporation 11th Gen > > > > > > > > > Core Processor PCIe > > > > > > > > > Controller (rev 01) (prog-if 00 [Normal decode]) > > > > > > > > > ... > > > > > > > > > Capabilities: [200 v1] L1 PM Substates > > > > > > > > > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ > > > > > > > > > ASPM_L1.1+ L1_PM_Substates+ > > > > > > > > > PortCommonModeRestoreTime=45us > > > > > > > > > PortTPowerOnTime=50us L1SubCtl1: PCI-PM_L1.2- > > > > > > > > > PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- T_CommonMode=45us > > > > > > > > > LTR1.2_Threshold=101376ns L1SubCtl2: T_PwrOn=50us > > > > > > > > > > > > > > > > > > 10000:e1:00.0 Non-Volatile memory controller: Sandisk > > > > > > > > > Corp WD Blue SN550 > > > > > > > > > NVMe SSD (rev 01) (prog-if 02 [NVM Express]) > > > > > > > > > ... > > > > > > > > > Capabilities: [900 v1] L1 PM Substates > > > > > > > > > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ > > > > > > > > > ASPM_L1.1- L1_PM_Substates+ > > > > > > > > > PortCommonModeRestoreTime=32us > > > > > > > > > PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- > > > > > > > > > PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- T_CommonMode=0us > > > > > > > > > LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us > > > > > > > > > > > > > > > > > > According to "PCIe r6.0, sec 5.5.4", before enabling > > > > > > > > > ASPM L1.2 on the PCIe > > > > > > > > > Root Port and the child NVMe, they should be programmed > > > > > > > > > with the same LTR1.2_Threshold value. However, they > > > > > > > > > have different values in this case. > > > > > > > > > > > > > > > > > > Invoke aspm_calc_l12_info() to program the L1.2 > > > > > > > > > parameters properly before > > > > > > > > > enable L1.2 bits of L1 PM Substates Control Register in > > > > > > > > > __pci_enable_link_state(). > > > > > > > > > > > > > > > > > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=218394 > > > > > > > > > Signed-off-by: Jian-Hong Pan <jhp@xxxxxxxxxxxxx> > > > > > > > > > --- > > > > > > > > > v2: > > > > > > > > > - Prepare the PCIe LTR parameters before enable L1 > > > > > > > > > Substates > > > > > > > > > > > > > > > > > > v3: > > > > > > > > > - Only enable supported features for the L1 Substates > > > > > > > > > part > > > > > > > > > > > > > > > > > > v4: > > > > > > > > > - Focus on fixing L1.2 parameters, instead of > > > > > > > > > re-initializing whole L1SS > > > > > > > > > > > > > > > > > > v5: > > > > > > > > > - Fix typo and commit message > > > > > > > > > - Split introducing aspm_get_l1ss_cap() to "PCI/ASPM: > > > > > > > > > Introduce aspm_get_l1ss_cap()" > > > > > > > > > > > > > > > > > > v6: > > > > > > > > > - Skipped > > > > > > > > > > > > > > > > > > v7: > > > > > > > > > - Pick back and rebase on the new version kernel > > > > > > > > > - Drop the link state flag check. And, always config > > > > > > > > > link state's timing > > > > > > > > > parameters > > > > > > > > > > > > > > > > > > v8: > > > > > > > > > - Because pcie_aspm_get_link() might return the link as > > > > > > > > > NULL, move getting the link's parent and child devices > > > > > > > > > after check the link is not NULL. This avoids NULL > > > > > > > > > memory access. > > > > > > > > > > > > > > > > > > drivers/pci/pcie/aspm.c | 15 +++++++++++++++ > > > > > > > > > 1 file changed, 15 insertions(+) > > > > > > > > > > > > > > > > > > diff --git a/drivers/pci/pcie/aspm.c > > > > > > > > > b/drivers/pci/pcie/aspm.c index > > > > > > > > > 5db1044c9895..55ff1d26fcea 100644 --- > > > > > > > > > a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c > > > > > > > > > @@ -1411,9 +1411,15 @@ > > > > > > > > > EXPORT_SYMBOL(pci_disable_link_state); static int > > > > > > > > > __pci_enable_link_state(struct pci_dev *pdev, int > > > > > > > > > state, bool locked) > > > > > > > > > { > > > > > > > > > struct pcie_link_state *link = > > > > > > > > > pcie_aspm_get_link(pdev); > > > > > > > > > + u32 parent_l1ss_cap, child_l1ss_cap; > > > > > > > > > + struct pci_dev *parent, *child; > > > > > > > > > > > > > > > > > > if (!link) > > > > > > > > > return -EINVAL; > > > > > > > > > + > > > > > > > > > + parent = link->pdev; > > > > > > > > > + child = link->downstream; > > > > > > > > > + > > > > > > > > > /* > > > > > > > > > * A driver requested that ASPM be enabled on > > > > > > > > > this device, but > > > > > > > > > * if we don't have permission to manage ASPM > > > > > > > > > (e.g., on ACPI @@ -1428,6 +1434,15 @@ static int > > > > > > > > > __pci_enable_link_state(struct pci_dev > > > > > > > > > *pdev, int state, bool locked) > > > > > > > > > if (!locked) > > > > > > > > > down_read(&pci_bus_sem); > > > > > > > > > mutex_lock(&aspm_lock); > > > > > > > > > + /* > > > > > > > > > + * Ensure L1.2 parameters: > > > > > > > > > Common_Mode_Restore_Times, T_POWER_ON and > > > > > > > > > + * LTR_L1.2_THRESHOLD are programmed properly > > > > > > > > > before enable bits for > > > > > > > > > + * L1.2, per PCIe r6.0, sec 5.5.4. > > > > > > > > > + */ > > > > > > > > > + parent_l1ss_cap = aspm_get_l1ss_cap(parent); > > > > > > > > > + child_l1ss_cap = aspm_get_l1ss_cap(child); > > > > > > > > > + aspm_calc_l12_info(link, parent_l1ss_cap, > > > > > > > > > child_l1ss_cap); > > > > > > > > > > > > > > I still don't think this is the place to recalculate the > > > > > > > L1.2 parameters especially when know the calculation was > > > > > > > done but was cleared by pci_bus_reset(). Can't we just do a > > > > > > > pci_save/restore_state() before/after pci_bus_reset() in > > > > > > > vmd.c? > > > > > > > > > > > > I have not thought pci_save/restore_state() around > > > > > > pci_bus_reset() before. It is an interesting direction. > > > > > > > > > > > > So, I prepare modification below for test. Include "[PATCH > > > > > > v8 1/4] PCI: vmd: Set PCI devices to D0 before enable PCI > > > > > > PM's L1 substates", too. Then, both the PCIe bridge and the > > > > > > PCIe device have the same LTR_L1.2_THRESHOLD 101376ns as > > > > > > expected. > > > > > > > > > > > > diff --git a/drivers/pci/controller/vmd.c > > > > > > b/drivers/pci/controller/vmd.c index > > > > > > bbf4a47e7b31..6b8dd4f30127 100644 --- > > > > > > a/drivers/pci/controller/vmd.c +++ > > > > > > b/drivers/pci/controller/vmd.c @@ -727,6 +727,18 @@ static > > > > > > void vmd_copy_host_bridge_flags(struct pci_host_bridge > > > > > > *root_bridge, vmd_bridge->native_dpc = > > > > > > root_bridge->native_dpc; } > > > > > > > > > > > > +static int vmd_pci_save_state(struct pci_dev *pdev, void > > > > > > *userdata) +{ > > > > > > + pci_save_state(pdev); > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int vmd_pci_restore_state(struct pci_dev *pdev, void > > > > > > *userdata) +{ > > > > > > + pci_restore_state(pdev); > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > /* > > > > > > * Enable ASPM and LTR settings on devices that aren't > > > > > > configured by BIOS. */ > > > > > > @@ -927,6 +939,7 @@ static int vmd_enable_domain(struct > > > > > > vmd_dev *vmd, unsigned long features) > > > > > > pci_scan_child_bus(vmd->bus); > > > > > > vmd_domain_reset(vmd); > > > > > > > > > > > > + pci_walk_bus(vmd->bus, vmd_pci_save_state, NULL); > > > > > > /* When Intel VMD is enabled, the OS does not > > > > > > discover the Root Ports > > > > > > * owned by Intel VMD within the MMCFG space. > > > > > > pci_reset_bus() applies > > > > > > * a reset to the parent of the PCI device supplied > > > > > > as argument. This > > > > > > @@ -945,6 +958,7 @@ static int vmd_enable_domain(struct > > > > > > vmd_dev *vmd, unsigned long features) > > > > > > break; > > > > > > } > > > > > > } > > > > > > + pci_walk_bus(vmd->bus, vmd_pci_restore_state, NULL); > > > > > > > > > > Why not call pci_reset_bus() (or __pci_reset_bus()) then in > > > > > vmd_enable_domain() which preserves state unlike > > > > > pci_reset_bus()? > > > > > > > > > > (Don't tell me naming of these functions is a horrible mess. > > > > > :-/) > > > > > > > > Hmm. So this *is* calling pci_reset_bus(). > > > > > > Yeah, I managed to get confused by the names myself, I somehow > > > ended up thinking it calls pci_bus_reset() which is not correct... > > > > > > > L1.2 configuration has specific > > > > ordering requirements for changes to parent & child devices. > > > > Could be why it's not getting restored properly. > > > > > > Indeed, it has to be something else since the patch above doesn't > > > even restore anything because dev->state_saved should get set to > > > false by the first pci_restore_state() called from > > > __pci_reset_bus() -> pci_bus_restore_locked() -> pci_dev_restore(), > > > I think!? > > > > Inspired by Ilpo's comment. I add some debug messages based on > > linux-next's tag 'next-20240809' to understand the code path of > > pci_reset_bus(): > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index ffaaca0978cb..3ee71374f1de 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -5133,8 +5133,10 @@ static void pci_dev_save_and_disable(struct > > pci_dev *dev) > > * races with ->remove() by the device lock, which must be > > held by > > * the caller. > > */ > > - if (err_handler && err_handler->reset_prepare) > > + if (err_handler && err_handler->reset_prepare) { > > + pci_info(dev, "%s: %pF\n", __func__, > > err_handler->reset_prepare); > > err_handler->reset_prepare(dev); > > + } > > > > /* > > * Wake-up device prior to save. PM registers default to D0 > > after @@ -5144,6 +5146,7 @@ static void > > pci_dev_save_and_disable(struct pci_dev *dev) > > pci_set_power_state(dev, PCI_D0); > > > > pci_save_state(dev); > > + pci_info(dev, "%s: PCI state_saved is %s\n", __func__, > > dev->state_saved ? "true" : "false"); > > /* > > * Disable the device by clearing the Command register, > > except for > > * INTx-disable which is set. This not only disables MMIO > > and I/O port @@ -5655,6 +5658,10 @@ static void > > pci_bus_save_and_disable_locked(struct pci_bus *bus) > > struct pci_dev *dev; > > > > list_for_each_entry(dev, &bus->devices, bus_list) { > > + pci_info(dev, "%s: PCI state_saved is %s, and %s > > subordinate\n", > > + __func__, > > + dev->state_saved ? "true" : "false", > > + dev->subordinate ? "has" : "does not have"); > > pci_dev_save_and_disable(dev); > > if (dev->subordinate) > > pci_bus_save_and_disable_locked(dev->subordinate); > > @@ -5671,6 +5678,10 @@ static void pci_bus_restore_locked(struct > > pci_bus *bus) struct pci_dev *dev; > > > > list_for_each_entry(dev, &bus->devices, bus_list) { > > + pci_info(dev, "%s: PCI state_saved is %s, and %s > > subordinate\n", > > + __func__, > > + dev->state_saved ? "true" : "false", > > + dev->subordinate ? "has" : "does not have"); > > pci_dev_restore(dev); > > if (dev->subordinate) > > pci_bus_restore_locked(dev->subordinate); > > @@ -5786,8 +5797,10 @@ static int pci_bus_reset(struct pci_bus *bus, > > bool probe) if (!bus->self || !pci_bus_resettable(bus)) > > return -ENOTTY; > > > > - if (probe) > > + if (probe) { > > + pci_info(bus->self, "%s: probe is true. So return 0 > > directly", __func__); > > return 0; > > + } > > > > pci_bus_lock(bus); > > > > @@ -5858,10 +5871,12 @@ static int __pci_reset_bus(struct pci_bus > > *bus) int rc; > > > > rc = pci_bus_reset(bus, PCI_RESET_PROBE); > > + pci_info(bus->self, "%s: pci_bus_reset() returns %d\n", > > __func__, rc); if (rc) > > return rc; > > > > if (pci_bus_trylock(bus)) { > > + pci_info(bus->self, "%s: pci_bus_trylock() returns > > true\n", __func__); > > pci_bus_save_and_disable_locked(bus); > > might_sleep(); > > rc = pci_bridge_secondary_bus_reset(bus->self); > > @@ -5881,6 +5896,7 @@ static int __pci_reset_bus(struct pci_bus *bus) > > */ > > int pci_reset_bus(struct pci_dev *pdev) > > { > > + pci_info(pdev, "%s: %s", __func__, > > !pci_probe_reset_slot(pdev->slot) ? "true" : "false"); > > return (!pci_probe_reset_slot(pdev->slot)) ? > > __pci_reset_slot(pdev->slot) : __pci_reset_bus(pdev->bus); > > } > > > > And, have the information of VMD PCIe devices with the built kernel: > > > > 10000:e0:06.0 PCI bridge [0604]: Intel Corporation 11th Gen Core > > Processor PCIe Controller [8086:9a09] (rev 01) (prog-if 00 [Normal > > decode]) > > ... > > Capabilities: [200 v1] L1 PM Substates > > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ > > L1_PM_Substates+ PortCommonModeRestoreTime=45us PortTPowerOnTime=50us > > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- > > T_CommonMode=0us LTR1.2_Threshold=0ns > > L1SubCtl2: T_PwrOn=0us > > > > 10000:e1:00.0 Non-Volatile memory controller [0108]: Sandisk Corp WD > > Blue SN550 NVMe SSD [15b7:5009] (rev 01) (prog-if 02 [NVM Express]) > > ... > > Capabilities: [900 v1] L1 PM Substates > > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- > > L1_PM_Substates+ PortCommonModeRestoreTime=32us PortTPowerOnTime=10us > > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- > > T_CommonMode=0us LTR1.2_Threshold=101376ns > > L1SubCtl2: T_PwrOn=50us > > > > We can see the NVMe has expected LTR1.2_Threshold=101376ns, but the > > PCIe bridge has LTR1.2_Threshold=0ns. > > > > Then, check the dmesg. I notice the debug messages: > > > > pci 10000:e0:06.0: PCI bridge to [bus e1] > > pci 10000:e0:06.0: Primary bus is hard wired to 0 > > pci 10000:e1:00.0: pci_reset_bus: false > > pci 10000:e0:06.0: pci_bus_reset: probe is true. So return 0 directly > > pci 10000:e0:06.0: __pci_reset_bus: pci_bus_reset() returns 0 > > pci 10000:e0:06.0: __pci_reset_bus: pci_bus_trylock() returns true > > pci 10000:e1:00.0: pci_bus_save_and_disable_locked: PCI state_saved is > > false, and does not have subordinate > > pci 10000:e1:00.0: pci_dev_save_and_disable: PCI state_saved is true > > Freeing initrd memory: 75236K > > pci 10000:e1:00.0: pci_bus_restore_locked: PCI state_saved is true, > > and does not have subordinate > > > > So, the code path is: > > > > vmd_enable_domain() > > pci_reset_bus() > > __pci_reset_bus() > > pci_bus_reset() > > pci_bus_save_and_disable_locked() > > pci_dev_save_and_disable() > > pci_bus_restore_locked() > > pci_dev_restore() > > > > And, from the debug messages, I learned only NVMe 10000:e1:00.0 does > > pci_save/restore_state. But, the PCIe bridge 10000:e0:06.0 does not. > > So, PCIe bridge 10000:e0:06.0 does not restore state correctly. > > > > Besides, it is NVMe 10000:e1:00.0's bus [e1] been reset, not the VMD's > > bus in vmd_enable_domain(). > > * Bus "e1" has only NVMe 10000:e1:00.0 > > * VMD's bus in vmd_enable_domain() has PCIe bridge 10000:e0:06.0, NVMe > > 10000:e1:00.0 and SATA Controller 10000:e0:17.0. > > > > Here is the PCI tree: > > > > -+-[0000:00]-+-00.0 Intel Corporation Device 9a04 > > | +-02.0 Intel Corporation Tiger Lake-LP GT2 [UHD > > Graphics G4] | +-04.0 Intel Corporation TigerLake-LP > > Dynamic Tuning Processor Participant > > | +-06.0 Intel Corporation RST VMD Managed Controller > > | +-07.0-[01-2b]-- > > | +-08.0 Intel Corporation GNA Scoring Accelerator module > > | +-0a.0 Intel Corporation Tigerlake Telemetry Aggregator > > Driver | +-0d.0 Intel Corporation Tiger Lake-LP > > Thunderbolt 4 USB Controller > > | +-0d.2 Intel Corporation Tiger Lake-LP Thunderbolt 4 > > NHI #0 | +-0e.0 Intel Corporation Volume Management Device > > NVMe RAID Controller > > | +-14.0 Intel Corporation Tiger Lake-LP USB 3.2 Gen 2x1 > > xHCI Host Controller > > | +-14.2 Intel Corporation Tiger Lake-LP Shared SRAM > > | +-14.3 Intel Corporation Wi-Fi 6 AX201 > > | +-15.0 Intel Corporation Tiger Lake-LP Serial IO I2C > > Controller #0 | +-15.1 Intel Corporation Tiger Lake-LP > > Serial IO I2C Controller #1 | +-16.0 Intel Corporation > > Tiger Lake-LP Management Engine Interface | +-17.0 Intel > > Corporation RST VMD Managed Controller | +-1f.0 Intel > > Corporation Tiger Lake-LP LPC Controller | +-1f.3 Intel > > Corporation Tiger Lake-LP Smart Sound Technology Audio Controller > > | +-1f.4 Intel Corporation Tiger Lake-LP SMBus Controller > > | +-1f.5 Intel Corporation Tiger Lake-LP SPI Controller > > | \-1f.6 Intel Corporation Ethernet Connection (13) I219-V > > \-[10000:e0]-+-06.0-[e1]----00.0 Sandisk Corp WD Blue SN550 NVMe SSD > > \-17.0 Intel Corporation Tiger Lake-LP SATA Controller > > > > According the findings above, to ensure the devices on the VMD bus > > have correctly states, seems pci_save_state() all the devices before > > pci_reset_bus(), and pci_restore_state() all the devices after > > pci_reset_bus() is the correct answer. > > Did you get a chance to test this theory? Yes. But, according the findings in the previous mail talking about restoring parent's LTR1.2_Threshold with a wrong value 0, it can be shrunk to save/restore the PCIe bridge's state. Preparing a new patch set. Jian-Hong Pan
