Re: [PATCH v8 4/4] PCI/ASPM: Fix L1.2 parameters when enable link state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



David E. Box <david.e.box@xxxxxxxxxxxxxxx> 於 2024年8月6日 週二 上午4:26寫道:
>
> Hi Jian-Hong,
>
> On Fri, 2024-08-02 at 16:24 +0800, Jian-Hong Pan wrote:
> > Jian-Hong Pan <jhp@xxxxxxxxxxxxx> 於 2024年7月19日 週五 下午4:04寫道:
> > >
> > > Currently, when enable link's L1.2 features with __pci_enable_link_state(),
> > > it configs the link directly without ensuring related L1.2 parameters, such
> > > as T_POWER_ON, Common_Mode_Restore_Time, and LTR_L1.2_THRESHOLD have been
> > > programmed.
> > >
> > > This leads the link's L1.2 between PCIe Root Port and child device gets
> > > wrong configs when a caller tries to enabled it.
> > >
> > > Here is a failed example on ASUS B1400CEAE with enabled VMD:
> > >
> > > 10000:e0:06.0 PCI bridge: Intel Corporation 11th Gen Core Processor PCIe
> > > Controller (rev 01) (prog-if 00 [Normal decode])
> > >     ...
> > >     Capabilities: [200 v1] L1 PM Substates
> > >         L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
> > > L1_PM_Substates+
> > >                   PortCommonModeRestoreTime=45us PortTPowerOnTime=50us
> > >         L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> > >                    T_CommonMode=45us LTR1.2_Threshold=101376ns
> > >         L1SubCtl2: T_PwrOn=50us
> > >
> > > 10000:e1:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN550
> > > NVMe SSD (rev 01) (prog-if 02 [NVM Express])
> > >     ...
> > >     Capabilities: [900 v1] L1 PM Substates
> > >         L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> > > L1_PM_Substates+
> > >                   PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
> > >         L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> > >                    T_CommonMode=0us LTR1.2_Threshold=0ns
> > >         L1SubCtl2: T_PwrOn=10us
> > >
> > > According to "PCIe r6.0, sec 5.5.4", before enabling ASPM L1.2 on the PCIe
> > > Root Port and the child NVMe, they should be programmed with the same
> > > LTR1.2_Threshold value. However, they have different values in this case.
> > >
> > > Invoke aspm_calc_l12_info() to program the L1.2 parameters properly before
> > > enable L1.2 bits of L1 PM Substates Control Register in
> > > __pci_enable_link_state().
> > >
> > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=218394
> > > Signed-off-by: Jian-Hong Pan <jhp@xxxxxxxxxxxxx>
> > > ---
> > > v2:
> > > - Prepare the PCIe LTR parameters before enable L1 Substates
> > >
> > > v3:
> > > - Only enable supported features for the L1 Substates part
> > >
> > > v4:
> > > - Focus on fixing L1.2 parameters, instead of re-initializing whole L1SS
> > >
> > > v5:
> > > - Fix typo and commit message
> > > - Split introducing aspm_get_l1ss_cap() to "PCI/ASPM: Introduce
> > >   aspm_get_l1ss_cap()"
> > >
> > > v6:
> > > - Skipped
> > >
> > > v7:
> > > - Pick back and rebase on the new version kernel
> > > - Drop the link state flag check. And, always config link state's timing
> > >   parameters
> > >
> > > v8:
> > > - Because pcie_aspm_get_link() might return the link as NULL, move
> > >   getting the link's parent and child devices after check the link is
> > >   not NULL. This avoids NULL memory access.
> > >
> > >  drivers/pci/pcie/aspm.c | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > >
> > > diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> > > index 5db1044c9895..55ff1d26fcea 100644
> > > --- a/drivers/pci/pcie/aspm.c
> > > +++ b/drivers/pci/pcie/aspm.c
> > > @@ -1411,9 +1411,15 @@ EXPORT_SYMBOL(pci_disable_link_state);
> > >  static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool
> > > locked)
> > >  {
> > >         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
> > > +       u32 parent_l1ss_cap, child_l1ss_cap;
> > > +       struct pci_dev *parent, *child;
> > >
> > >         if (!link)
> > >                 return -EINVAL;
> > > +
> > > +       parent = link->pdev;
> > > +       child = link->downstream;
> > > +
> > >         /*
> > >          * A driver requested that ASPM be enabled on this device, but
> > >          * if we don't have permission to manage ASPM (e.g., on ACPI
> > > @@ -1428,6 +1434,15 @@ static int __pci_enable_link_state(struct pci_dev
> > > *pdev, int state, bool locked)
> > >         if (!locked)
> > >                 down_read(&pci_bus_sem);
> > >         mutex_lock(&aspm_lock);
> > > +       /*
> > > +        * Ensure L1.2 parameters: Common_Mode_Restore_Times, T_POWER_ON and
> > > +        * LTR_L1.2_THRESHOLD are programmed properly before enable bits for
> > > +        * L1.2, per PCIe r6.0, sec 5.5.4.
> > > +        */
> > > +       parent_l1ss_cap = aspm_get_l1ss_cap(parent);
> > > +       child_l1ss_cap = aspm_get_l1ss_cap(child);
> > > +       aspm_calc_l12_info(link, parent_l1ss_cap, child_l1ss_cap);
>
> I still don't think this is the place to recalculate the L1.2 parameters
> especially when know the calculation was done but was cleared by
> pci_bus_reset(). Can't we just do a pci_save/restore_state() before/after
> pci_bus_reset() in vmd.c?

I have not thought pci_save/restore_state() around pci_bus_reset()
before.  It is an interesting direction.

So, I prepare modification below for test.  Include "[PATCH v8 1/4]
PCI: vmd: Set PCI devices to D0 before enable PCI PM's L1 substates",
too.  Then, both the PCIe bridge and the PCIe device have the same
LTR_L1.2_THRESHOLD 101376ns as expected.

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index bbf4a47e7b31..6b8dd4f30127 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -727,6 +727,18 @@ static void vmd_copy_host_bridge_flags(struct
pci_host_bridge *root_bridge,
        vmd_bridge->native_dpc = root_bridge->native_dpc;
 }

+static int vmd_pci_save_state(struct pci_dev *pdev, void *userdata)
+{
+       pci_save_state(pdev);
+       return 0;
+}
+
+static int vmd_pci_restore_state(struct pci_dev *pdev, void *userdata)
+{
+       pci_restore_state(pdev);
+       return 0;
+}
+
 /*
  * Enable ASPM and LTR settings on devices that aren't configured by BIOS.
  */
@@ -927,6 +939,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd,
unsigned long features)
        pci_scan_child_bus(vmd->bus);
        vmd_domain_reset(vmd);

+       pci_walk_bus(vmd->bus, vmd_pci_save_state, NULL);
        /* When Intel VMD is enabled, the OS does not discover the Root Ports
         * owned by Intel VMD within the MMCFG space. pci_reset_bus() applies
         * a reset to the parent of the PCI device supplied as argument. This
@@ -945,6 +958,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd,
unsigned long features)
                        break;
                }
        }
+       pci_walk_bus(vmd->bus, vmd_pci_restore_state, NULL);

        pci_assign_unassigned_bus_resources(vmd->bus);


Jian-Hong Pan

> > > +
> > >         link->aspm_default = pci_calc_aspm_enable_mask(state);
> > >         pcie_config_aspm_link(link, policy_to_aspm_state(link));
> > >
> > > --
> > > 2.45.2
> > >
> >
> > Hi Nirmal and Paul,
> >
> > It will be great to have your review here.
> >
> > I had tried to "set the threshold value in vmd_pm_enable_quirk()"
> > directly as Paul said [1].  However, it still needs to get the PCIe
> > link from the PCIe device to set the threshold value.
> > And, pci_enable_link_state_locked() gets the link. Then, it will be
> > great to calculate and programm L1 sub-states' parameters properly
> > before configuring the link's ASPM there.
> >
> > [1]:
> > https://lore.kernel.org/linux-kernel/20240624081108.10143-2-jhp@xxxxxxxxxxxxx/T/#mc467498213fe1a6116985c04d714dae378976124
> >
> > Jian-Hong Pan
>





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux