On 10/07/2013 01:58 PM, Benoit Cousson wrote: > Hi Javier, > > On 07/10/2013 13:54, Javier Martinez Canillas wrote: >> On 10/07/2013 12:43 PM, Roger Quadros wrote: >>> Javier, >>> >>> On 10/05/2013 03:04 AM, Javier Martinez Canillas wrote: >>>> Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards") >>>> added USB OTG support for most OMAP boards but some OMAP3 boards >>>> such as the IGEPv2 were not updated. This patch adds an USB OTG >>>> device node to this board. >>>> >>>> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> >>>> --- >>>> arch/arm/boot/dts/omap3-igep0020.dts | 7 +++++++ >>>> 1 file changed, 7 insertions(+) >>>> >>>> diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts >>>> index eedf0d8..903e944 100644 >>>> --- a/arch/arm/boot/dts/omap3-igep0020.dts >>>> +++ b/arch/arm/boot/dts/omap3-igep0020.dts >>>> @@ -166,3 +166,10 @@ >>>> smsc,save-mac-address; >>>> }; >>>> }; >>>> + >>>> +&usb_otg_hs { >>>> + interface-type = <0>; >>>> + usb-phy = <&usb2_phy>; >>> >>> With the PHY generic framework in Greg's usb-next branch [1], you will also need to add >>> >>> + phys = <&usb2_phy>; >>> + phy-names = "usb2-phy"; >>> >>>> + mode = <3>; >>>> + power = <50>; >>>> +}; >>>> >>> >>> So it would be good to test with the usb-next branch. >>> >>> cheers, >>> -roger >>> >>> [1] - git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git >>> >> >> Hi Roger, >> >> Thanks for the pointer, I'll add those properties and test using the PHY generic >> framework. > > Should I expect a v3 then? > Hi Benoit, Yes, I'll test it and send a v3 in the next few hours, sorry for not being clear about that. > Benoit > > > Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html