On 10/07/2013 12:43 PM, Roger Quadros wrote: > Javier, > > On 10/05/2013 03:04 AM, Javier Martinez Canillas wrote: >> Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+ boards") >> added USB OTG support for most OMAP boards but some OMAP3 boards >> such as the IGEPv2 were not updated. This patch adds an USB OTG >> device node to this board. >> >> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> >> --- >> arch/arm/boot/dts/omap3-igep0020.dts | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts >> index eedf0d8..903e944 100644 >> --- a/arch/arm/boot/dts/omap3-igep0020.dts >> +++ b/arch/arm/boot/dts/omap3-igep0020.dts >> @@ -166,3 +166,10 @@ >> smsc,save-mac-address; >> }; >> }; >> + >> +&usb_otg_hs { >> + interface-type = <0>; >> + usb-phy = <&usb2_phy>; > > With the PHY generic framework in Greg's usb-next branch [1], you will also need to add > > + phys = <&usb2_phy>; > + phy-names = "usb2-phy"; > >> + mode = <3>; >> + power = <50>; >> +}; >> > > So it would be good to test with the usb-next branch. > > cheers, > -roger > > [1] - git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git > Hi Roger, Thanks for the pointer, I'll add those properties and test using the PHY generic framework. Thanks a lot and best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html