On 13/06/13 18:51, Igor Grinberg wrote: > Hi Tomi, > > On 06/04/13 10:40, Tomi Valkeinen wrote: >> Hi guys, > >> I've made some big changes on the omapdss device model, which involves >> converting all the panel drivers. I've got only a bunch of boards, so I >> hope some of you can perhaps do some minimal tests on some other boards. > >> I've got: Beagle (old one), Panda, 4430SDP, Overo with LCD43. > >> The code can be found from the below git branch. It's based on 3.10-rc1. > >> git://gitorious.org/linux-omap-dss2/linux.git work/dss-dev-model > > Works on cm-t3730. > Tested with tdo24m LCD and DVI. Thanks! > Although one thing is missing from the tfp410 driver is > the PD GPIO polarity. I had to adjust it locally to get the DVI working. > The original polarity was high = disabled, low = enabled. Hmm, but this is missing from the old driver also, isn't it? At least with a quick glance the old and new tfp410 drivers do the same thing with the PD gpio. Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
