-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Tomi, On 06/04/13 10:40, Tomi Valkeinen wrote: > Hi guys, > > I've made some big changes on the omapdss device model, which involves > converting all the panel drivers. I've got only a bunch of boards, so I > hope some of you can perhaps do some minimal tests on some other boards. > > I've got: Beagle (old one), Panda, 4430SDP, Overo with LCD43. > > The code can be found from the below git branch. It's based on 3.10-rc1. > > git://gitorious.org/linux-omap-dss2/linux.git work/dss-dev-model Works on cm-t3730. Tested with tdo24m LCD and DVI. Although one thing is missing from the tfp410 driver is the PD GPIO polarity. I had to adjust it locally to get the DVI working. The original polarity was high = disabled, low = enabled. - -- Regards, Igor. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRuep6AAoJEBDE8YO64EfaXsIP/19xfE9BlqtswMRgr3uOEaJf gnh9JcwMebMWiCFcyCw96EP7C/oW6GmVdyGDLnZmjJ9ZqA1al0I4Lia1LDJDNxtZ EDLIAaY1Wf4JN0wcVVAy1o4jHiYu6jpLLME3JNXGU6HwUgrSEcXOBd62veIjHcE3 f1p3HvGvfXJxU0/7JCohpRteTIqXjmG9BxBcyAnes0lhBozOwIOO0uLtiH+XeSJe Sn907bkdFk6qG8m+FSQWyJZMKLGZuE0nNOQ2obMeXk6nvj8TnO9x4W51I5DnsfgT ZnCtcnuC3RGLo1YmUBFSBDLsd9VZgD3K2c/ysfpwM9Os2XvImGbUkX6ToJ4iMr0T Ika2ljsMCbObbqQGiSbEM7JiOOc5QL6AB4b+uwD8VEDd4JwzkaMugBSYn8B38y5u PxCFWMihZGlyWVHS+qwON+cS59Y1xj0b7pvQRlar+ufQDk/gQBPNbJFnzIaU8B3D 6qx9TL7QmPJ172+dVIbcWLMMLLwa5ityajIaETgmQw6GMNLyUghf50I6k8rRHnzc JA3UFkeYGplYfVPHpWM2fNvSDin9yTELbGty0QzszlUWRHqpmXlyEYk/VMShWE8h LNKv+FZ1VwNFD3PmZINVB4IWflT9X/52hgrrACxBVAPG7xhahGA+XV6e10zc1cPd 7dnQIlL7OugAAWC5ttaw =sLEz -----END PGP SIGNATURE----- -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
