Hi Rajendra, On 02/04/2013 05:58 PM, Roger Quadros wrote: > Provide the RESET and Power regulators for the USB PHY, > the USB Host port mode and the PHY device. > > Also provide pin multiplexer information for the USB host > pins. > > Signed-off-by: Roger Quadros <rogerq@xxxxxx> > --- > arch/arm/boot/dts/omap4-panda.dts | 55 +++++++++++++++++++++++++++++++++++++ > 1 files changed, 55 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts > index 4122efe..fe2d3d4 100644 > --- a/arch/arm/boot/dts/omap4-panda.dts > +++ b/arch/arm/boot/dts/omap4-panda.dts > @@ -57,6 +57,35 @@ > "AFML", "Line In", > "AFMR", "Line In"; > }; > + > + /* HS USB Port 1 RESET */ > + hsusb1_reset: hsusb1_reset_reg { > + compatible = "regulator-fixed"; > + regulator-name = "hsusb1_reset"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 30 0>; /* gpio_62 */ > + startup-delay-us = <70000>; > + enable-active-high; > + }; > + > + /* HS USB Port 1 Power */ > + hsusb1_power: hsusb1_power_reg { > + compatible = "regulator-fixed"; > + regulator-name = "hsusb1_vbus"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio1 1 0>; /* gpio_1 */ > + startup-delay-us = <70000>; > + enable-active-high; > + }; > + > + /* HS USB Host PHY on PORT 1 */ > + hsusb1_phy: hsusb1_phy { > + compatible = "usb-nop-xceiv"; > + reset-supply = <&hsusb1_reset>; > + vcc-supply = <&hsusb1_power>; > + }; This is the patch I was discussing with you about before. Let me explain the problem again. The Pandaboard has a USB PHY whose reference clock is provided by FREF_CLK3 pin which is a clock generated by the OMAP. The PHY driver expects a reference to this clock in the PHY device node. See the above node hsusb1_phy. we would need something like hsusb1_phy { ... clocks = <&fref_clk3>; clock-names = "main_clk"; ... }; Currently on OMAP, there is no way to provide a phandle to this clock. Is it practical to provide device tree based implementation of at least the externally accessible OMAP clocks? cheers, -roger > }; > > &omap4_pmx_core { > @@ -67,6 +96,7 @@ > &mcbsp1_pins > &dss_hdmi_pins > &tpd12s015_pins > + &hsusbb1_pins > >; > > twl6040_pins: pinmux_twl6040_pins { > @@ -110,6 +140,23 @@ > 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ > >; > }; -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html