Re: No more software ECC in omap2.c NAND driver. Why?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/21/10 1:01 PM, Charles Manning wrote:
> Just recompiling with the CONFIG_MTD_NAND_OMAP_HWECC define commented out did
> not result in a working system. I suspect there is more tto the problem than
> this.

FWIW, I had the exact same issues with my Mistral AM37x EVM board. I not
only had to remove/deassert CONFIG_MTD_NAND_OMAP_HWECC, but also had to roll
back nand_base.c and nand_bbt.c back to their 2.6.32 versions (later ones
between .32 and .35 might have worked but I didn't bother trying) to be able
to read, error-free and correctly, NAND that was erased and written with a
.32-era kernel.

Best,

Grant Erickson


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux