> -----Original Message----- > From: Grant Erickson [mailto:marathon96@xxxxxxxxx] > Sent: Monday, November 22, 2010 11:39 AM > To: Charles Manning > Cc: linux-omap@xxxxxxxxxxxxxxx; Grazvydas Ignotas; Ghorai, Sukumar > Subject: Re: No more software ECC in omap2.c NAND driver. Why? > > On 11/21/10 1:01 PM, Charles Manning wrote: > > Just recompiling with the CONFIG_MTD_NAND_OMAP_HWECC define commented > out did > > not result in a working system. I suspect there is more tto the problem > than > > this. > > FWIW, I had the exact same issues with my Mistral AM37x EVM board. I not > only had to remove/deassert CONFIG_MTD_NAND_OMAP_HWECC, but also had to > roll > back nand_base.c and nand_bbt.c back to their 2.6.32 versions (later ones > between .32 and .35 might have worked but I didn't bother trying) to be > able > to read, error-free and correctly, NAND that was erased and written with a > .32-era kernel. [Ghorai] are you trying again? How do you flush the FS (form u-boot or from kernel, nandwrite)? And let me know the test you are doing, to know the steps to reproduce in my platform - zoom/sdp. > > Best, > > Grant Erickson > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
