Hi Sanjeev, Thanks much for the help. > I tried building the latest on l-o master and was able to boot consistently > in 4 times I tried. Didn't notice the gpio clock related error I noticed in > your boot log. > > > U-Boot 2010.09 (Nov 08 2010 - 17:11:45) > > OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 EVM board + LPDDR/NAND Note that mine is ES1.0 (yours is ES2.0): OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz Not sure if that's any clue. Tonight I got the latest stuff: git clone git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git and built it up with: make omap2plus_defconfig ARCH=arm And got this http://www.efn.org/~rick/pub/boot6.log It's basically the same, I get the 3 warnings and sometimes eth0 works and sometimes it doesn't. Note that my board works flawlessly with the kernel on the SD Card. What compiler are you using? I tried CodeSourcery 2009q1 and 2010q1 with the same results. How did you configure your u-boot? Could you send me your boot up text? Could you send me your u-boot.bin (and or your uImage) so I can try it? I might help me figure out what's going on. Thanks again. Rick -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
