> -----Original Message----- > From: Rick Bronson [mailto:rick@xxxxxxx] > Sent: Tuesday, November 09, 2010 10:24 AM > To: linux-omap@xxxxxxxxxxxxxxx > Cc: Premi, Sanjeev > Subject: RE: Mistral AM37x (with AM3715) devel board networking broken > > Hi Sanjeev, > > Thanks much for the help. > > > I tried building the latest on l-o master and was able to > boot consistently > > in 4 times I tried. Didn't notice the gpio clock related > error I noticed in > > your boot log. > > > > > > U-Boot 2010.09 (Nov 08 2010 - 17:11:45) > > > > OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > > OMAP3 EVM board + LPDDR/NAND > > Note that mine is ES1.0 (yours is ES2.0): > > OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 > Ghz > > Not sure if that's any clue. > > Tonight I got the latest stuff: > > git clone > git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-oma > p-2.6.git > > and built it up with: > > make omap2plus_defconfig ARCH=arm > > And got this > > http://www.efn.org/~rick/pub/boot6.log > > It's basically the same, I get the 3 warnings and sometimes > eth0 works > and sometimes it doesn't. Note that my board works flawlessly with > the kernel on the SD Card. > > What compiler are you using? I tried CodeSourcery > 2009q1 and 2010q1 with the same results. [sp] I am mostly using 2009q1; but have use 2010q1 earlier in JUL; didn't see any issues back then. > > How did you configure your u-boot? [sp] It is default configuration on the u-boot master. > > Could you send me your boot up text? Could you send me your > u-boot.bin (and or your uImage) so I can try it? I might help me > figure out what's going on. [sp] Will send offline ~sanjeev > > Thanks again. > > Rick > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
