On Tue, Nov 9, 2010 at 10:23 AM, Rick Bronson <rick@xxxxxxx> wrote: > Hi Sanjeev, > > Thanks much for the help. > >> I tried building the latest on l-o master and was able to boot consistently >> in 4 times I tried. Didn't notice the gpio clock related error I noticed in >> your boot log. >> >> >> U-Boot 2010.09 (Nov 08 2010 - 17:11:45) >> >> OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz >> OMAP3 EVM board + LPDDR/NAND > > Note that mine is ES1.0 (yours is ES2.0): > > OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > > Not sure if that's any clue. > That's interesting - there shouldn't b e an ES2.0 of the 3630/3730. The highest revision is an ES1.2. > Tonight I got the latest stuff: > > git clone git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git > > and built it up with: > > make omap2plus_defconfig ARCH=arm > > And got this > > http://www.efn.org/~rick/pub/boot6.log > > It's basically the same, I get the 3 warnings and sometimes eth0 works > and sometimes it doesn't. Note that my board works flawlessly with > the kernel on the SD Card. > > What compiler are you using? I tried CodeSourcery > 2009q1 and 2010q1 with the same results. > > How did you configure your u-boot? > > Could you send me your boot up text? Could you send me your > u-boot.bin (and or your uImage) so I can try it? I might help me > figure out what's going on. > > Thanks again. > > Rick > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
