if i not using nfs...how to mount the another partition in mmc? On 8/18/09, Tar Gz <bsdraisefromhell@xxxxxxxxx> wrote: > On 8/17/09, Kovacs Peter Tamas <p.kovacs@xxxxxxxxxxxxxxx> wrote: >> Hi, >> >> we use these parameters for NFS booting: >> setenv bootargs console=ttyS2,115200n8 noinitrd root=/dev/nfs rw >> nfsroot=10.95.102.32:/home/filesystems/tifs,nolock,vers=3,rsize=2048,wsize=2048, >> tcp dyntick=e ip=dhcp nohz=off >> >> or without DHCP: >> setenv bootargs console=ttyS2,115200n8 noinitrd,rw root=/dev/nfs >> nfsroot=10.95.102.32:/home/filesystems/tifs,nolock, mem=112M nohz=off >> ip=10.95.102.33:10.95.96.1:10.95.96.1:255.255.240.0:infba00798::off >> devfs=mount >> > > oke i try it.... > > in the another mailing list, the problem about different speed > bootloader and linux kernel..if that's my problem..how i can fix > that?....thanks before > > Regards, > Aldyth M >> and it works. >> Try it! >> >> Peter >>> hmm,,i boot again and kernel panic cannot sync VFS >>> >>> because no respond from my nfs server... >>> >>> but i'm try to mount y nfs directory in the another computer, it's >>> work..i don't know whre is the problem? >>> >>> On 8/16/09, Kovacs Peter Tamas <p.kovacs@xxxxxxxxxxxxxxx> wrote: >>> >>>> Hi, >>>> >>>> I don't think that it's a problem with the filesystem, if you followed >>>> the tutorial then you have the filesystem on the second partition, and >>>> your bootargs are pointing there too. >>>> Do you have a DHCP server running somewhere? >>>> If you have DHCP, but the OMAP cannot use it for some reason, you can >>>> still try forcing a static IP instead of DHCPing, like discussed here: >>>> http://focus.ti.com/lit/an/spraaq0/spraaq0.pdf >>>> >>>> That is, add something like >>>> ip=clientIP:serverIP:gatewayIP:netMask:::off >>>> to your bootargs. >>>> More info about the meaning of the above here: >>>> http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/Documentation/nfsroot.txt >>>> >>>> Peter >>>> >>>>> thanks peter, i can boot but the kernel stop in the >>>>> Sending DHCP Requests . <7>hub 1-0:1.0 hub_suspend >>>>> ....... >>>>> >>>>> how to boot filesystems has installed from mmc?...thanks >>>>> >>>>> On 8/16/09, Tar Gz <bsdraisefromhell@xxxxxxxxx> wrote: >>>>> >>>>> >>>>>> thanks mr.peter >>>>>> >>>>>> i should try the command like that >>>>>> >>>>>> #nand unlock >>>>>> #nand ecc sw >>>>>> #setenv bootargs 'console=ttyS3,115200n8 root=/dev/mmcblk0p2 rw >>>>>> rootdelay=1 mem=256M init=/init' >>>>>> #setenv bootcmd 'mmcinit; fatload mmc 0 0x80c00000 uImage; bootm >>>>>> 0x80c00000' >>>>>> #saveenv >>>>>> #boot >>>>>> >>>>>> it is stop(like hang) and i must restart again >>>>>> >>>>>> On 8/16/09, Kovacs Peter Tamas <p.kovacs@xxxxxxxxxxxxxxx> wrote: >>>>>> >>>>>> >>>>>>> Dear Aldyth, >>>>>>> >>>>>>> u-boot stops and waits for your command to load and start the >>>>>>> kernel, >>>>>>> as >>>>>>> the bootcmd is not doing it automatically with your setup (setting >>>>>>> bootargs is not enough alone, you need to load the kernel image from >>>>>>> the >>>>>>> card and run it). >>>>>>> You should try: >>>>>>> mmcinit >>>>>>> fatload mmc 0 80300000 uImage >>>>>>> bootm 80300000 >>>>>>> >>>>>>> As described at eg: >>>>>>> http://www.codeshogun.com/blog/2009/04/15/porting-android-to-beagle-board/ >>>>>>> >>>>>>> Hope this helps, >>>>>>> Peter >>>>>>> >>>>>>> >>>>>>>> it is my step to build u-boot, x-loader and kernel >>>>>>>> >>>>>>>> i'm try linux 2.6.30 and using the omap3430sdp_defconfig to build >>>>>>>> the >>>>>>>> uImage >>>>>>>> >>>>>>>> my u-boot and x-loader using omap3430zoom2_config >>>>>>>> >>>>>>>> any idea to solve that problem?... >>>>>>>> >>>>>>>> regards, >>>>>>>> Aldyth M >>>>>>>> >>>>>>>> On 8/16/09, Tar Gz <bsdraisefromhell@xxxxxxxxx> wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> i'm format mmc in the fat win95... >>>>>>>>> >>>>>>>>> i following step by step in the >>>>>>>>> https://omapzoom.org/gf/project/omapkernel/wiki/?pagename=Getting+Stated+with+Linux+OMAP+Kernel >>>>>>>>> >>>>>>>>> why can't read? >>>>>>>>> >>>>>>>>> On 8/16/09, Tar Gz <bsdraisefromhell@xxxxxxxxx> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> i'm format mmc in the fat win95... >>>>>>>>>> >>>>>>>>>> i following step by step in the >>>>>>>>>> https://omapzoom.org/gf/project/omapkernel/wiki/?pagename=Getting+Stated+with+Linux+OMAP+Kernel >>>>>>>>>> >>>>>>>>>> why can't read? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> On 8/16/09, Felipe Balbi <me@xxxxxxxxxxxxxxx> wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Hi, >>>>>>>>>>>> >>>>>>>>>>>> On Sun, Aug 16, 2009 at 12:48:52PM -0400, Tar Gz wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> Hi all,,i'm sorry if my english too bad >>>>>>>>>>>>> >>>>>>>>>>>>> i try to porting linux kernel 2.6.30 from kernel.org into omap >>>>>>>>>>>>> 3430 >>>>>>>>>>>>> >>>>>>>>>>>>> i have the problem linux kernel can't booting >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> i'm following step by step in the omapzoom.org >>>>>>>>>>>>> $ setenv bootargs console=ttyS3,115200n8 root=/dev/mmcblk0p2 >>>>>>>>>>>>> rw >>>>>>>>>>>>> rootdelay=1 mem=256M init=/sbin/init >>>>>>>>>>>>> $ saveenv >>>>>>>>>>>>> $ bootd >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> OMAP34XX LAB # print >>>>>>>>>>>>> bootdelay=3 >>>>>>>>>>>>> baudrate=115200 >>>>>>>>>>>>> bootargs=console=ttyS3,115200n8 root=/dev/mmcblk0p2 >>>>>>>>>>>>> rootdelay=1 >>>>>>>>>>>>> mem=256M init=/sbin/init >>>>>>>>>>>>> bootcmd=mmcinit >>>>>>>>>>>>> bootfile="uImage" >>>>>>>>>>>>> >>>>>>>>>>>>> if i'm type bootd i'm still in the konsole like this, >>>>>>>>>>>>> OMAP34XX LAB # bootd >>>>>>>>>>>>> OMAP34XX LAB # >>>>>>>>>>>>> >>>>>>>>>>>>> any idea? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> you're not reading the kernel image to memory. >>>>>>>>>>>> >>>>>>>>>>>> is your mmc formated with FAT32 or what ? >>>>>>>>>>>> >>>>>>>>>>>> You need to read kernel from mmc to memory and boot from there. >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> balbi >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>> -- >>>>>>>> To unsubscribe from this list: send the line "unsubscribe >>>>>>>> linux-omap" >>>>>>>> in >>>>>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>>>>> >>>>>>>> >>>>>>>> >>>>> -- >>>>> To unsubscribe from this list: send the line "unsubscribe linux-omap" >>>>> in >>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html >>>>> >>>>> >>>> >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
