Hi all, While cleaning up legacy platform data I noticed to my horror that we are in a "half-chicken, half-egg" state with with the legacy booting vs device tree booting instead of dealing with just the traditional "chicken or the egg" problem. Basically we are missing some critical dts data for "ti,hwmods" and IO ranges for example. This data is needed by the SoC interconnect code and things just happen to work now with the legacy platform data still around. Note that the IO range in the dts should be for the interconnect target module, typically sized 0x1000. Then there can be one or more device instances as a child of the interconnect target module. Mostly this is a problem on omap4, the other SoCs only have few nodes and properties missing. For the missing nodes and properties, I've also updated or added the binding documentation. For some devices, there is currently no driver available like is the case for face detect and GPU modules for example. Regards, Tony Changes since v1: - Updated hsi, iss, fdif, gpu, and smartreflex patches based on the subsystem maintainer comments - Added Rob and Mark in Cc for the patches touching binding documentation Tony Lindgren (17): ARM: dts: Add missing dma hwmods property for omap3 ARM: dts: Configure pmu without interrupt for omap4430 ARM: dts: Add missing properties for omap4 control modules ARM: dts: Add missing hwmods property for omap4 dma ARM: dts: Add missing smartreflex node and binding for omap4 ARM: dts: Add missing slimbus node and binding for omap4 ARM: dts: Add missing onewire node for omap4 ARM: dts: Add missing hsi node for omap4 ARM: dts: Add missing iss node and binding for omap4 ARM: dts: Add missing wdt3 node for omap4 ARM: dts: Add missing mcasp node for omap4 ARM: dts: Add missing aess node and binding for omap4 ARM: dts: Add missing fdif node and binding for omap4 ARM: dts: Add missing gpu node and binding for omap4 ARM: dts: Add missing dma hwmod property for omap5 ARM: dts: Add missing hwmod related nodes for am33xx ARM: dts: Add missing hwmod related properties for dra7 .../devicetree/bindings/arm/omap/ctrl.txt | 2 + .../devicetree/bindings/gpu/ti-powervr-sgx.txt | 39 +++++ Documentation/devicetree/bindings/hsi/omap-ssi.txt | 7 +- .../devicetree/bindings/media/ti-fdif.txt | 29 ++++ Documentation/devicetree/bindings/media/ti-iss.txt | 33 ++++ .../bindings/memory-controllers/ti/emif.txt | 6 +- .../devicetree/bindings/power/ti-smartreflex.txt | 47 ++++++ .../bindings/sound/davinci-mcasp-audio.txt | 1 + .../devicetree/bindings/sound/ti-aess.txt | 33 ++++ .../devicetree/bindings/sound/ti-slimbus.txt | 34 ++++ arch/arm/boot/dts/am33xx.dtsi | 10 +- arch/arm/boot/dts/dra7.dtsi | 8 + arch/arm/boot/dts/omap3.dtsi | 1 + arch/arm/boot/dts/omap4.dtsi | 176 +++++++++++++++++++-- arch/arm/boot/dts/omap5.dtsi | 1 + 15 files changed, 413 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpu/ti-powervr-sgx.txt create mode 100644 Documentation/devicetree/bindings/media/ti-fdif.txt create mode 100644 Documentation/devicetree/bindings/media/ti-iss.txt create mode 100644 Documentation/devicetree/bindings/power/ti-smartreflex.txt create mode 100644 Documentation/devicetree/bindings/sound/ti-aess.txt create mode 100644 Documentation/devicetree/bindings/sound/ti-slimbus.txt -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
