On omap4, we are missing several ti,hwmods properties and IO
ranges for system control modules. These are needed by the SoC
interconnect code.
Note that this will only show up as a bug with "doesn't have
mpu register target base" boot errors when the legacy platform
data is removed.
In order to add these, we need to move omap4_pmx_wkup to be a
child of omap4_padconf_wkup.
On omap4 there are separate modules for control module and
control module pads. For control module core, we have this
already configured except for the missing ti,hwmods and reg
entries.
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
.../devicetree/bindings/arm/omap/ctrl.txt | 2 ++
arch/arm/boot/dts/omap4.dtsi | 39 ++++++++++++++++------
2 files changed, 31 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
--- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -21,6 +21,8 @@ Required properties:
"ti,omap3-scm"
"ti,omap4-scm-core"
"ti,omap4-scm-padconf-core"
+ "ti,omap4-scm-wkup"
+ "ti,omap4-scm-padconf-wkup"
"ti,omap5-scm-core"
"ti,omap5-scm-padconf-core"
"ti,dra7-scm-core"
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -174,6 +174,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2000 0x1000>;
+ ti,hwmods = "ctrl_module_core";
scm_conf: scm_conf@0 {
compatible = "syscon";
@@ -186,9 +187,11 @@
omap4_padconf_core: scm@100000 {
compatible = "ti,omap4-scm-padconf-core",
"simple-bus";
+ reg = <0x100000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x100000 0x1000>;
+ ti,hwmods = "ctrl_module_pad_core";
omap4_pmx_core: pinmux@40 {
compatible = "ti,omap4-padconf",
@@ -263,17 +266,33 @@
};
};
- omap4_pmx_wkup: pinmux@1e040 {
- compatible = "ti,omap4-padconf",
- "pinctrl-single";
- reg = <0x1e040 0x0038>;
+ omap4_scm_wkup: scm@c000 {
+ compatible = "ti,omap4-scm-wkup";
+ reg = <0xc000 0x1000>;
+ ti,hwmods = "ctrl_module_wkup";
+ };
+
+ omap4_padconf_wkup: padconf@1e000 {
+ compatible = "ti,omap4-scm-padconf-wkup",
+ "simple-bus";
+ reg = <0x1e000 0x1000>;
#address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <1>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ #size-cells = <1>;
+ ranges = <0 0x1e000 0x1000>;
+ ti,hwmods = "ctrl_module_pad_wkup";
+
+ omap4_pmx_wkup: pinmux@40 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
};
};
};
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
