Re: [PATCH 1/3] ARM: dts: omap5-board-common: enable rtc and charging of backup battery

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tony,

Am 12.01.2016 um 01:09 schrieb Tony Lindgren <tony@xxxxxxxxxxx>:

> * Tony Lindgren <tony@xxxxxxxxxxx> [160111 12:27]:
>> 
>> OK so the issue is that the twl msecure pin should be high to enable
>> the RTC registers. We used to have that code with platform_data, but
>> no longer have it with device tree based booting. I'll send a patch
>> for that.
>> 
>> Curiously setting jumper j5 on beagle-x15 that controls what used to
>> be the msecure and now is powerhold, does the opposite.. The
>> device boots automatically but RTC is stopped?
> 
> And here's a fix the issue for omap5. Beagle-x15 needs to be
> investigated more.
> 
> Care to test it with your RTC enabling patch?

yes, I will test asap.

Reminds me on some issues we did have with msecure and twl4030 rtc some years ago.

BR,
Nikolaus

> 
> Regards,
> 
> Tony
> 
> 8< ---------------
> From: Tony Lindgren <tony@xxxxxxxxxxx>
> Date: Mon, 11 Jan 2016 14:35:24 -0800
> Subject: [PATCH] ARM: dts: Fix omap5 PMIC control lines for RTC writes
> 
> The palmas PMIC has some control lines that need to be muxed properly
> for things to work. The sys_nirq pin is used for interrupts, and msecure
> pin is used for enabling writes to some PMIC registers.
> 
> Without these pins configured properly things can fail in mysterious
> ways. For example, we can't update the RTC registers on palmas PMIC
> unless the msecure pin is configured. And this is probably the reason
> why we had RTC missing from the omap5 dts file.
> 
> According to "OMAP5430 ES2.0 Data Manual [Public] VErsion A (Rev. F)"
> swps052f.pdf, mux mode 1 is for sys_drm_msecure so there's no need to
> configure it as a GPIO pin.
> 
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> 
> --- a/arch/arm/boot/dts/omap5-board-common.dtsi
> +++ b/arch/arm/boot/dts/omap5-board-common.dtsi
> @@ -213,6 +213,12 @@
> 		>;
> 	};
> 
> +	palmas_msecure_pins: palmas_msecure_pins {
> +		pinctrl-single,pins = <
> +			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE1) /* gpio8_234.sys_drm_msecure */
> +		>;
> +	};
> +
> 	usbhost_pins: pinmux_usbhost_pins {
> 		pinctrl-single,pins = <
> 			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
> @@ -278,6 +284,12 @@
> 			&usbhost_wkup_pins
> 	>;
> 
> +	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
> +		pinctrl-single,pins = <
> +			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
> +		>;
> +	};
> +
> 	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
> 		pinctrl-single,pins = <
> 			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
> @@ -345,6 +357,8 @@
> 		interrupt-controller;
> 		#interrupt-cells = <2>;
> 		ti,system-power-controller;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
> 
> 		extcon_usb3: palmas_usb {
> 			compatible = "ti,palmas-usb-vid";

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux