Re: [PATCH v2 1/3] wlcore/wl12xx: spi: add power operation function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/24/2015 05:35 PM, Uri Mashiach wrote:
The power function uses a consumer regulator access to update the WiFi
enable GPIO value.

Signed-off-by: Uri Mashiach <uri.mashiach@xxxxxxxxxxxxxx>
---
v1 -> v2: oops fix was removed to a separate fix.

  drivers/net/wireless/ti/wlcore/spi.c | 37 ++++++++++++++++++++++++++++++++++++
  1 file changed, 37 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c


[...]

+
  static struct wl1271_if_operations spi_ops = {
  	.read		= wl12xx_spi_raw_read,
  	.write		= wl12xx_spi_raw_write,
  	.reset		= wl12xx_spi_reset,
  	.init		= wl12xx_spi_init,
+	.power		= wl12xx_spi_set_power,
  	.set_block_size = NULL,
  };

@@ -353,6 +384,12 @@ static int wl1271_probe(struct spi_device *spi)
  	 * comes from the board-peripherals file */
  	spi->bits_per_word = 32;

+	glue->reg = devm_regulator_get(&spi->dev, "vwlan");
+	if (IS_ERR(glue->reg)) {

It will be more correct to handle -EPROBE_DEFER here also. Like:
 		if (PTR_ERR(glue->reg) == -EPROBE_DEFER)
			return PTR_ERR(glue->reg);

+		dev_err(glue->dev, "can't get regulator\n");
+		return PTR_ERR(glue->reg);
+	}
+
  	ret = spi_setup(spi);
  	if (ret < 0) {
  		dev_err(glue->dev, "spi_setup failed\n");



--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux